| 陶瓷过滤器正向流动与过滤过程的数值模拟/Numerical Calculation of Gas Flows and Filtrations in the Ce |
| 新型动力循环陶瓷过滤元件除尘技术研究 |
| 静态自蔓延法制备陶瓷内衬复合管增韧研究/Study on Toughening Technique of Ceramic Composite Pipes Pro |
| 小型天线及其阵列的研究/A Study of Small Antennas and Array |
| 基于虚拟仪器技术的机器视觉系统在瓷砖检测中的应用研究/The Application Research of Machine Vision System Bas |
| AlN/BN层状复合陶瓷材料的制备与性能/Fabrication and Properties of AlN/BN Laminated Ceramic Comp |
| 碳化硅网眼多孔陶瓷的制备/Preparation of SiC reticulated porous ceramic |
| 铝合金微弧氧化陶瓷层的制备与性能研究/Study of Preparation and Performance of Ceramic Coatings Form |
| 微波陶瓷在天线上的应用/The Application of Microwave Ceramic in antenna |
| SiC/BN层状陶瓷的制备和性能/Fabrication and Properties of SiC/BN Multilayered Ceramic Compo |
| 静态自蔓延法制备陶瓷内衬复合喷嘴的研究/study on ceramic-lined nozzles produced by static self-propa |
| 先进燃煤联合循环陶瓷过滤器研究/Research of Ceramic Filter in Advanced Coal-fired Power Cycle |
| 高温陶瓷过滤器本体设计及反向脉冲清洗瞬态流动模型分析/Design of High Pressure Ceramic Filter and Transient |
| 陶瓷过滤器反向射流清洗系统性能分析/Analysis of the Performances of Reverse Jet Cleaning System fo |
| SrTIO3系高压陶瓷电容器击穿特性的研究/Study on the Breakdown Character of Strontium Titanate Sys |
| 偏压及异质晶相对厚膜电致发光器件性能影响的研究/Study of biased voltage and heterogenous crystal influen |
| 高压陶瓷电容器在频繁充放电左右下老化失效机理的研究/Study on Aging Failure Mechanism of HV Ceramic Capacit |
| 无机-有机复合膜的制备及其在渗透蒸发醇/水分离中的应用/The preparation of organic-inorganic Composite Membr |
| 新型陶瓷刀具材料抗热震性的研究/Study of thermal shock resistance of new sorts of ceramic tool m |
| 陶瓷水煤浆喷嘴温度场及热应力有限元分析/Temperature and Thermal Stress Analysis of Coal Water Slurry |
| 新型组合式陶瓷水煤浆喷嘴的设计开发及其损坏机理研究/DEVELOPMENT OF ASSEMBLED COAL-WATER-SLURRY CERAMIC NOZ |
| 热挤压模具用工程陶瓷材料的研制及力学性能仿真/STUDY ON THE DEVELOPMENT OF ENGINEERING CERAMIC IN HOT-EX |
| 铝合金微弧氧化工艺研究/Investigation on Technology of Micro-arc Oxidation on the Surface of |
| PZT/PVDF 压电复合材料的制备及其性能研究/The preparation and the properties study of PZT/PVDF pi |
| 低压陶瓷电容式压力传感器的研究/The study of low pressure ceramic capacitive pressure transducer |
| 碳化硅粉体表面改性研究及其高固相含量料浆的制备/Study of SiC powder surface modification and perparation |
| 工程陶瓷零件的加工及加工机理的研究/The research on manufacturing and processing mechanism of engi |
| 现代陶艺在环境艺术中的运用/ |
| 陶瓷窑控制系统的设计与仿真/ |
| 微滤陶瓷管的研究/ |
| Al_2O_3陶瓷人工半髋关节股骨头精密磨削工艺研究/ |
| 氧化铝陶瓷人工关节股骨头的数控车削加工研究/ |
| TiB_2基可加工陶瓷的制备研究/Preparation study of machinable TiB_2 ceramic composite |
| 锂铝硅系统透明微晶玻璃的研制/Study and preparation on Li_2O-Al_2O_3-SiO_2 transparent glass -c |
| 0-3型复合材料中组元性能对其压电性能影响的研究/Study on the influence of properties of components on t |
| 微晶玻璃/金属复合新型装饰材料的研究/The study on the glass－ceramic/metal composite new decorative |
| 柠檬酸盐法制备NBT基陶瓷的压电性能与铁电性能研究/The piezoelectric and ferroelectric properties of NBT- |
| 1-3型PZT5 /epoxy resin压电复合材料的制备、结构与性能研究/Study on fabrication, structure and prope |
| 三效催化转化器及陶瓷密封衬垫评价系统的研究与开发/Study and development of the three-way catalytic conver |
| TiB2-BN三元复相导电陶瓷的制备及性能/Study on fabrication and performance of TiB2-BN tri-phase |
| 基于ARM的生态多孔陶瓷综合性能检测装置的研制/Research of the testing setting of multi-performance of |
| 用硅酸铝质耐火材料废料制备氧化铝基陶瓷的技术及机理研究/Study on the technology and mechanism of alumina cer |
| 多孔陶瓷干燥技术与应用研究/Second drying technique and application study of porous ceramic |
| 反应熔渗法制备SiC陶瓷材料及其结构与性能研究/Preparation of SiC ceramic materials by reaction melt in |
| 齿科用金属烤瓷材料的制备/The preparation of porcelain-fused-to-metal material for dental use |
| 基于数字图像处理的陶瓷瓶裂纹检测研究/Research on ceramic-bottle-crack inspecting system based on d |
| PZT基压电纤维/环氧树脂1-3复合材料结构及性能研究/Study on the effect of PZT based piezoelectric fiber |
| Al2O3-ZrO2-YAG复相陶瓷的制备及性能研究/Preparation and properities of Al2O3-ZrO2-YAG multi-p |
| 高温烟气净化用孔梯度陶瓷纤维膜的设计、制备及特性/Design, fabrication and characteristics of porous gradi |
| 3Y-TZP纳米陶瓷材料制备和超塑成形研究 |
| 功能梯度复合管的制备、微观组织及性能研究 |
| 功能梯度复合管的制备、微观组织及性能研究 |
| GⅠ-Ⅱ渗透陶瓷适用的基础型饰面瓷热匹配性能研究 |
| GⅠ-Ⅱ渗透陶瓷适用的基础型饰面瓷热匹配性能研究 |
| 几种自蔓延高温合成新技术及其应用基础研究 |
| 陶瓷介观结构对应力分布影响的有限元模拟/MODELING THE EFFECTS OF CERAMIC MESOCOPIC STRUCTURE ON STRES |
| 滑石质介电陶瓷的制备及性能分析/ |
| 新型牙科微晶玻璃的初步研制/ |
| 308nmXeCl准分子激光对IPS-Empress铸造玻璃陶瓷表面粗糙度影响的评价/ |
| 佛山陶瓷产业发展过程中的政府职能定位/ |
| Physical limitations of the inherent toughness and strength in ceramic-ceramic a |
| Nano-sized ceramic powders yet to make an impact |
| Nanocrystalline materials |
| Synthesis and pyrolysis of liquid organometallic precursors for advanced Si-Ti-C |
| Ceramic coatings for carbonaceous composites from kaolinite |
| Nanosized Si-C-N-powder by pyrolysis of highly crosslinked silylcarbodiimide |
| Design and operation of a nanocluster generation and collection system |
| Ceramic and metals development - a selective overview |
| Self-assembly in the synthesis of ceramic materials and composites |
| Hydrothermal preparation of nanosized cubic ZrO2 powders |
| Commercialization issues in superplastic forming of nanocrystalline ceramics |
| Ultrafine alumina particles prepared by mechanochemical/thermal processing |
| Comments on physical limitations of the inherent toughness and strength in ceram |
| Reply to comments on physical limitations of the inherent toughness and strength |
| Development of ceramic nanocomposites |
| TEM studies of nanometric ceramic oxide powders prepared by ball-milling |
| Preparation of mixed silicon carbide fiber with the function of absorbing microw |
| Potential of nanosized ceramic powder for functional applications |
| Comparative study of YBCO powders prepared by different processes |
| New microstructural model of polymer-ceramic nanocomposite materials |
| From the powder to the electro and/or magnetic ceramic component: Fine grain siz |
| Synthesis and characterization of MgAl2O4 spinel ceramic precursor |
| Intra-granular strengthening and toughening by brittle nanoparticles in ceramic |
| Microstructure and mechanical properties for alumina/copper nanocomposites |
| High pressure compaction of nanosize ceramic powders |
| Opportunities for ceramics industry |
| Dispersion hardening of metals by nanoscaled ceramic powders |
| Characterization and sintering of reactive cerium(IV) oxide powders prepared by |
| Preparation, structure and properties of ZnS·SiO2 nanocomposites |
| Novel ceramic matrix nanocomposite powders containing carbon nanotubes |
| Tape casting of Al2O3-TiB2/Al2O 3-nano-TiC multilayer composites |
| Mixed silicon carbide fiber and microwave-absorbing properties |
| Fabrication of fine YAG-particulate-dispersed alumina fiber |
| Are low-loss glass-ceramic optical waveguides possible? |
| Ceramic matrix composites - present status and future trends |
| Experimental observations on the mechanical properties of nanoscale ceramic/Tefl |
| Chemically modified ceramic membranes |
| Microstructure-electrical transport correlation in ceramic oxide thin films |
| Synthesis of alumina-nitride nanocomposites by successive reduction-nitridation |
| X-ray microstructural characterization of Y-PSZ (5 mol%) nanocrystalline powder |
| Combustion aerosol synthesis of nanoscale ceramic powders |
| Carbon nanotubes-Fe-alumina nanocomposites. Part I: influence of the Fe conten |
| Mechanical properties and optimal analysis on various level micro-compounded cer |
| Manufacturing Nanocrystalline Materials by Physical Vapor Synthesis |
| Development and properties of ceramic membranes for liquid filtration |
| Structure and optical properties of sol-gel deposited TiO2-SiO2 nano-composition |
| The ceramic humidity sensors on the base of zirconium dioxide |
| Processing and properties of carbon nanotubes-nano-SiC ceramic |
| Nano explosion |
| Variations in the properties of ceramic nano-clusters |
| Silicon oxycarbide glasses derived from polymer precursors |
| XPS investigation of Si3N4/SiC nanocomposites prepared using a commercial polyme |
| Nanopowders seek commercial roles to repay R&D effort |
| Adsorption, rheology, packing, and sintering of nanosize ceramic powders |
| Preparation of a nanostructured organoceramic and its reversible interlayer expa |
| Progress of ceramic-matrix nanocomposites |
| Preparation of uniformly mixed ceramic nanocomposites |
| Characterization of barium titanate ceramic/ceramic nanocomposite films prepared |
| Characteristics and retention properties of a mesoporous γ-Al2O3 membrane |
| Determination of strength for reliability analysis of multilayer ceramic capacit |
| Ordered bicontinuous nanoporous and nanorelief ceramic films from self assemblin |
| Innovative molding technologies for the fabrication of components for microsyste |
| Nanopore ceramic membranes as novel electrolytes for proton exchange membranes |
| Design of a laser CVD rapid prototyping system |
| Wet-chemical method for the synthesis of in-doped CaZrO3 ceramic powders |
| Some recent developments in aqueous sol-gel processing |
| Multi-Functional Ceramic Composites through Nanocomposite Technology |
| Formation of interface coatings on SiC and sapphire fibers using metal doped car |
| AFM, a tool for investigating indentation damage in ZrO2 |
| Precise numerical prediction of effective dielectric constant for polymer-cerami |
| Study on an Al2O3(W, Ti)C composite ceramic tool material reinforced and toughen |
| U.S. emerges as dominant force in ceramic powders |
| Ceramic thin films on organic self-assembled monolayers: synthesis and the mech |
| In vitro evaluation of novel polymer/ceramic nanocomposites for orthopaedic mate |
| Preparation and microstructure characterization of nanomullite composite oxide b |
| New developments in electrolytic deposition of ceramic films |
| Selective sorption of cesium using self-assembled monolayers on mesoporous suppo |
| New progresses of the preparation processing of 0-3 piezoelectric ceramic/polyme |
| Ceramic membrane filter using ultrafine powders |
| Introduction to the special topical issue on ultrahigh-temperature polymer-deriv |
| Polyferrocenylsilane and magnetic ceramic microspheres |
| Nanocomposite ceramics on basis of solid solution of carbon in silicon carbide |
| Modelling the sol-gel process of producing the selective layers of ceramic membr |
| Constructing the curves of compaction of ceramic powders on basis of one-paramet |
| Role of the ceramic fillers in enhancing the transport properties of composite p |
| Nanopolishing of AlTiC composite ceramics |
| Modeling of multi-electrolyte transport in charged ceramic and organic nanofilte |
| Pore size optimisation of humidity sensor - A probabilistic approach |
| Evaluation of the machinability of nickel-base, Inconel 718, alloy with nano-cer |
| Present situation and development prospect in nanocomposite ceramics techniques |
| Fabrication and mechanical properties of Al2O3/SiC ceramic nanocomposites |
| Interfacial microstructure of 20% SO2/Al matrix composites reinforced with in si |
| Formation of nanocrystalline calcia by the decomposition of calcite |
| Nanostructured ceramic powders by hydrothermal synthesis and their applications |
| Alumina-alumina artificial hip joints. Part II: Characterisation of the wear deb |
| Lectures on Physicochemical problems in ceramic material science |
| Replicating the structure of a crosslinked polyferrocenylsilane inverse opal in |
| Chicago, USA: Fine ultrafine and nano particles 2001 |
| Polymer-ceramic composite protonic conductors |
| Separation of isomeric xylenes using cyclodextrin-modified ceramic membranes |
| Sintering characteristics of nano-ceramic coatings |
| International conference on electrophoretic deposition |
| Electrokinetic investigations of nanocrystalline ceramic oxidic powders as basis |
| Drexel forms nanotechnology institute |
| Advanced ceramic materials outlook |
| Preface |
| Effects of clinically relevant alumina ceramic wear particles on TNF-α pro |
| Preparation of zeolite membranes on the inner surface of ceramic tubes and capil |
| Characteristics and application of new ceramic nanofiltration membranes |
| Electrophoretic deposition of ceramic coatings on ceramic composite substrates |
| Influence of the content of ceramic phase on the precipitation hardening of Al a |
| Some problems in production of dense ceramics on basis of nanopowders of silicon |
| Direct synthesis of ceramic membranes by sol-gel process |
| Sonoelectrochemistry of molecular and colloidal redox systems at carbon nanofibe |
| Fabrication of Dense Nanostructured Silicon Carbide Ceramics through Two-Step Si |
| Synthesis of ceramic materials on basis of oxides of magnesium and aluminum |
| Partial electrochemical oxidation of phenol on ceramic-based flat-sheet type ele |
| Study of a low - Melting temperature bioactive glass for dental machinable infil |
| Stability of aqueous nano-ceramic coatings with two different dispersants |
| Synthesis and characterization of nano-sized Si-B-O-N ceramic powders |
| Yb3+:Sc2O3 ceramic laser |
| Nano-ceramics, ceramic composites and ceramic nano-composites |
| Finite-element simulation and experimental research of the hot-press sintering o |
| Study of structure and performance of ceramic coating on aluminum alloy by plasm |
| Self-propagating high-temperature synthesis of nano/micron Al2O3-ZrO2 liner comp |
| Effects of processing technology on property and microstructure of rare earth co |
| Effect of Cr2O3 on the electrical properties of ZnO-based ceramic films with low |
| PTCR effect of BaPbO3 ceramic with Al electrode |
| Macroporous and nanosized ceramic films prepared by modified sol-gel method with |
| Thermal history effects on the ionic conductivity of PEO-salt electrolytes |
| Luminescence properties of lustre decorated majolica |
| Performance characteristics of alumina-yttria ceramic cutting tool on machining |
| The enhancement of lithium ion dissociation in polyelectrolyte gels on the addit |
| Synthesis and characterization of Al2O3/Cr2O3-based ceramic pigments |
| Production of ceramic slips from plasma-chemical ZrO2-Y2O3, Al2O3 powders |
| Production and properties of tubular substrates of ceramic membranes |
| Production and properties of tubular substrates of ceramic membranes. Part 2. Su |
| Foreword: Special section on EuroSimE |
| Preparation of nanosized mixed-oxide powders |
| Manufacture and compositional analysis of silicon nitride composites with differ |
| A biomimetic approach to the deposition of zirconia films on self-assembled nano |
| Creep-Rupture behavior of fine-diameter ceramic fibers with nano-sized grains |
| Design and nanofabrication of superconductor ceramic strands and customized lead |
| Toward applications of ceramic nanostructures |
| Nanoceramic composites: Tough to test |
| Nanocrystalline-matrix ceramic composites for improved fracture toughness |
| Microstructure and mechanical properties of Ti(C, N)/Al2O3 ceramic die material |
| Experimental research on silica gel adsorptive material with ceramic fiber matri |
| Study of the stability of nano-γ-Al2O3 based gas sensors |
| Research progress in fabrication of ceramic coatings |
| Electrophoretic deposition and its application in ceramics processing |
| Preparation and performance of nano-TiO2 films on ceramic substrate |
| Preparation of Al2O3 - SiO2 - TiO2 - ZrO2 composite ceramic membranes by Sol-Gel |
| Mechano-chemical effects on synthesis of ceramic materials and its compositions |
| Synthesis of ultrahigh-temperature Si-B-C-N ceramic from polymeric waste gas |
| YSZ freestanding films from hybrid polymer-oxide composites by the sol-gel proce |
| Catalytic performance of metal nanoparticles supported by ceramic composite prod |
| Electrically conductive CNT-dispersed silicon nitride ceramics |
| Nano-scaled oxides: Versatile problem solvers for the future |
| Nanoexplosion synthesis of multimetal oxide ceramic nanopowders |
| Materials progress: Multiple ceramic layers keep Co/WC knife edges sharper |
| Application of electrophoretic and electrolytic deposition techniques in ceramic |
| Application of electrophoretic and electrolytic deposition techniques in ceramic |
| Preparation of three-dimensional ordered macroporous SiCN ceramic using sacrific |
| Gold like lustre: Nanometric surface treatment for decoration of glazed ceramics |
| Si3N4 and Al2O3 based ceramic nanocomposites |
| Ceramic materials in microsystems technology |
| Progress with system solutions |
| 9th ECerS conference |
| 9th international ceramic processing science symposium |
| Nanotechnologie in der lackiervorbehandlung: Ersatz fur die konventionelle eisen |
| PZT-type materials with improved radial piezoelectric properties |
| Oxidation kinetics of metallic inclusions in a composite with an Al 2O3-ZrO2 mat |
| Intergranular films at metal-ceramic interfaces: Part II - Calculation of Hamake |
| Intergranular films at metal-ceramic interfaces: Part I - Interface structure an |
| Carbon nanostructures on high-temperature ceramics - A novel composite material |
| Co-continuous metal-ceramic nanocomposites |
| Nanostructured non-oxide ceramics templated via block copolymer self-assembly |
| Transparent magnetic glass-ceramics |
| Preparation of boron-carbide/carbon nanofibers from a poly(norbornenyldecaborane |
| High-performance static dissipative ceramics |
| Surface-enhanced Raman spectroscopy using silver-coated porous glass-ceramic sub |
| Microstructure and mechanical properties of ceramic/self-assembled monolayer bil |
| Zirconium tungstate (ZrW2O8)/polyimide nanocomposites exhibiting reduced coeffic |
| Component analyses of semiconductive ceramic moisture sensor |
| Silicon carbide from laser pyrolysis of polycarbosilane |
| Synthesis and properties of ceramic nanoparticles and nanocomposites |
| Ceramic coatings by ion irradiation of polycarbosilanes and polysiloxanes. II. H |
| Oxidation kinetics and mechanisms of ceramic-carbon composites. I. Modeling for |
| Sol-gel control of the micro/nanostructure of functional ceramic-ceramic and met |
| Transmission electron microscopy study of a semiconducting SrTiO3 ceramic conden |
| Microstructure and tribological properties of alumina ceramic with laser-dispers |
| Strengthening and toughening mechanisms of ceramic nanocomposites |
| Recent developments in ceramic nanocomposites |
| Dielectric properties of Pb(Zr,Ti)O3-dispersed MgO nanocomposite |
| Nano-objects with controlled shape, size, and composition from block copolymer m |
| Spatially distributed p-n heterojunction based on nanoporous TiO2 and CuSCN |
| Effect of nanopowder deagglomeration on the densities of nanocrystalline ceramic |
| Fractal-cluster kinetics in phase transformations in the relaxor ceramic PLZT |
| Preparation of ZnO conductive ceramics and its properties |
| Nanostructured ceramic coatings: engineering on an atomic scale |
| Nanocomposites from coated nanoparticles |
| Formation of ceramic thin films by ArF excimer laser ablation |
| A wet-chemical method for the synthesis of In-doped CaZrO3 ceramic powders |
| Asymmetric ceramic membranes from Langmuir-Blodgett deposition precursors: depos |
| Impedance spectroscopy study of PEO-based nanocomposite polymer electrolytes |
| Processing of Si3N4/SiC and boron-modified nanocomposites via ceramic precursor |
| Shaped ceramics with tunable magnetic properties from metal-containing polymers |
| Extending the lifetime of ceramic orthopaedic implants |
| (Ba,Ca)TiO3 PTCR ceramics with LaNiO3 thin-film electrodes: preparation and char |
| Semi-coherent zirconia inclusions in a ceramic matrix |
| Carbon nanotubes in novel ceramic matrix nanocomposites |
| Silicon carbonitride ceramics produced by pyrolysis of polymer ceramic precursor |
| Unusual dysprosium ceramic nano-fiber growth in a supercritical aqueous solution |
| A jelly-like ceramic fiber at 1193 K |
| Low temperature chemical synthesis of nanosized ceramic powders |
| On the significance of the H/E ratio in wear control: a nanocomposite coating ap |
| Calcium- and lanthanum-modified lead titanate (PCLT) ceramic and PCLT/vinylidene |
| Spin-polarized electron tunneling in lanthanum manganite |
| Preparation and properties of ZnO-based ceramic films for low-voltage varistors |
| Ceramic coatings on carbon and metallic fibres by electrophoretic deposition |
| Synthesis and characterization of nanocomposites with palladium embedded in meso |
| Nano-particles of oxides through chemical methods |
| Preparation and characterization of SiBON powders |
| Consolidation and crystallization of Si3N4/SiC nanocomposites from a poly(urea-s |
| Block copolymer-ceramic hybrid materials from organically modified ceramic precu |
| Nanocomposite PLZT ceramic materials in comparison with other processing techniq |
| Cobalt-doped transparent glass ceramic as a saturable absorber Q switch for erbi |
| Developments in vapour deposited ceramic coatings for tribological applications |
| Pyrolysis kinetics for the conversion of a polymer into an amorphous silicon oxy |
| Nano-structured metal-containing polymer precursors for high temperature non-oxi |
| A systematic study of ceramic nanostructures generated by arc discharge |
| Application of electrophoretic and electrolytic deposition techniques in ceramic |
| A general process for in situ formation of functional surface layers on ceramics |
| Study on nanometer ceramic powders preparation by washing process of ceramic mem |
| Fabrication of machinable BN/Al2O3 ceramic composites |
| Interfacial microstructure of 20% SiO2/Al matrix composites reinforced with in s |
| Preparation and microwave properties of BaO-Nd2O3-TiO2 nano particles |
| Novel porous ceramic material via burning of polylactide/layered silicate nanoco |
| Preparation of high concentration ZrO2 ceramic ink for jet-printing forming (II) |
| Manufacturing of porous oxide ceramics by replication of plant morphologies |
| Development of microwave processing of ceramics |
| Barium titanate glass-ceramic thin films for integrated high-dielectric media |
| Solution synthesis of Pb(Zr,Ti)O3 ceramic nano-powders |
| Ceramics produced from AlN nanopowder |
| UV-shielding ceramic nanoparticles synthesized by mechanochemical processing |
| Nanoparticles of Ni on Al2O3 ceramic powder coated by chemical reactions |
| Nanocrystalline powders based on ZrO2 for biomedical applications and power engi |
| Nickel-doped nanocrystalline glass-ceramic fiber |
| Microstructure and mechanical properties of Ti-Si-N coatings |
| Novel polymer-ceramic nanocomposite based on high dielectric constant epoxy form |
| Growth of unique carbon nanostructures on ceramic substrates |
| Colloidal processing of polymer ceramic nanocomposite integral capacitors |
| Polymer-ceramic nanocomposite capacitors for system-on-package (SOP) application |
| Electrospinning of polymeric and ceramic nanofibers as uniaxially aligned arrays |
| A flexible route to high strength α-alumina and aluminate spheres |
| Properties of a metal-ceramic cathode |
| How the masters in Umbria, Italy, generated and used nanoparticles in art fabric |
| Microstructures of ceramic composites with glass-ceramic matrices reinforced by |
| Mechanism of deformation of nanostructured ceramic coatings |
| Ultraprecision fabrication of glass ceramic aspherical mirrors by ELID-grinding |
| Preparation of high concentration ceramic inks for forming by jet-printing |
| Hard and wear-resistant titanium nitride films for ceramic cutting tools by puls |
| Nd3+:YGdO3 ceramic laser |
| Nd-doped ceramic YAG lasers and their future |
| The brittleness problem of ceramic material |
| Two-dimensional ceramic photonic crystals fabricated by a solution method |
| Preparation of lightweight alumina ceramic and in-situ synthesis of nanometer al |
| Investigation on selective laser sintering of nanocrystalline ceramic powders |
| Low-temperature processing and mechanical properties of zirconia and zirconia-al |
| Coating technology improvement of ceramic chamber and measurement of time charac |
| Novel route to prepare TiO2-coated ceramic and its photocatalytic function |
| Deformation behavior of nanostructured ceramic coatings deposited by thermal pla |
| Nanocomposite layers of ceramic oxides and metals prepared by reactive gas-flow |
| Approach of realizing material removal at nanometer level in ultraprecision poli |
| Study on fracture mechanism of alumina bubble ceramic |
| From micro to nano: properties and potential applications of micro- and nano-fil |
| Polymer coating on the surface of zirconia nanoparticles by inductively coupled |
| Sintering densification of Cu/Al2O3, nano-composite powders by electroless coppe |
| Plasma-sprayed ceramic coating by laser cladding of Al2O3 nano-particles |
| Preparation and properties of the AEO9/alcohol/alkane/water reverse microemulsio |
| Synthesis and properties of nanocomposites |
| Production of morph-genetic TiC/C ceramic |
| Mechanical behaviour of ferroelectric films on perovskite substrate |
| Spectroscopic and stimulated emission Characteristics of Nd3+ in transparent YAG |
| Percolation of single-walled carbon nanotubes in ceramic matrix nanocomposites |
| Characterization and composition evolution of multiple-phase nanoscaled ceramic |
| Synthesis of Eu-doped (Gd,Y)2O3 transparent optical ceramic scintillator |
| Recent advances in ceramic-polymer composite electrets |
| Engineering of superconductive ceramics |
| Process development for PWB compatible embedded capacitors |
| Nanostructured surface modification of ceramic-based microelectrodes to enhance |
| Material characterization of a high-dielectric-constant polymer-ceramic composit |
| Powder market update: nanoceramic applications emerge |
| Emission of an intense large area electron beam from a slab of porous dielectric |
| Submicrometer-scale patterning of ceramic thin films |
| Microfabrication of ceramic components by microstereolithography |
| Superfast generator-motor for gas microturbines |
| Extrusion of ceramic tubes with complex structures of non-uniform curvatures mad |
| New materials and technologies |
| Mechano-chemical effects in on synthesis of ceramic materials and its compositio |
| Mechanical properties and microstructure of ceramic materials Al2O3/Cr3C2/(W,Ti) |
| Fabrication of copper ferrite nanowalls on ceramic surfaces by an electrochemica |
| Gadolinium-doped ceria ceramics with a submicron structure for electrochemical a |
| Nanoprocesses in polymer-derived Si-O-C ceramics: Electronmicroscopic observatio |
| In situ CCVD synthesis of carbon nanotubes within a commercial ceramic foam |
| Ceramic particles obtained using W/O nano-emulsions as reaction media |
| Effect of nitride nano-scale multilayer coatings on functional properties of com |
| Assisted sintering via sol-gel deposition in low-fired ceramic preforms |
| Novel polymer-ceramic nanocomposite based on new concepts for embedded capacitor |
| Scalable ceramic lasers |
| Fabrication and optical reflection behavior of a two-dimensional barium titanate |
| Preparation of polymer-covered metal nanorods and metal microcrystals by intrins |
| Fabrication of ceramic microstructures via microcasting of nanoparticulate slurr |
| Ceramic temperature sensors for harsh environments |
| Nanoceramics intercalated with Gd-DTPA for potential imaging of systems in vivo |
| High temperature nanocomposite through engineered synthesis of hafnia nano-dispe |
| Erbium partitioning in a heavily doped transparent glass ceramic |
| Nanosized Si-C-N-power by pyrolysis of highly crosslinked silylcarbodiimide |
| ON THE THERMAL-DEGRADATION OF LOX-M TYRANNO(R) FIBERS |
| A COVALENT MICRO NANOCOMPOSITE RESISTANT TO HIGH-TEMPERATURE OXIDATION |
| Physical limitations of the inherent toughness and strength in ceramic-ceramic a |
| Control of molecular polymorphisms by a structured carbohydrate/ceramic delivery |
| Nanosized Si-C-N-power by pyrolysis of highly crosslinked silylcarbodiimide |
| Si3N4/SiC ceramic nanocomposites |