| BaTiO3/聚合物电应力控制复合材料介电特性的研究/Study on Dielectric Property of BaTiO3 filled Polymer |
| 聚合物复合PTC材料电导特性的研究/Study on the Conductance Properties of |
| 复合材料仪器支架的开发及其相关动力学问题研究/Development of a composite equipment supporter and resear |
| 复合轮齿式压缩机的研制及工作过程模拟 |
| 合成外护套断路器电容器的研制 |
| 结构型高阻尼复合材料研制及性能研究/preparation and property study of structural high damping comp |
| 机械合金化制备高强度高导电率Cu-MoSi2复合材料/Study on Cu-MoSi2 Composite with High Strength and Hi |
| 碳纤维增强聚合物基复合材料带孔层合板的逐步失效分析/Progressive Failure Analysis of CFRP Composite Laminat |
| 石油套管螺纹表面自润滑聚合物密封涂层的研究/An Investigation of Self-lubricated Polymer Matrix Composi |
| 生物形态多孔AlN/C陶瓷的制备及性能研究/ Fabrication and Mechanical Properties of Porous Biomorph- |
| 炭/炭出口锥背壁绝热层用复合材料的制备工艺及性能研究/Fabrication and study on the adiabatic composite for |
| 环氧复合材料的制备及其在陡脉冲下闪络特性的研究/study on preparation of epoxy composite and its property |
| Al2O3颗粒增强Fe-Cr-Ni耐热合金的/The fabrication and mechanical properties of Al2O3 partic |
| Ni-P-PTFE化学复合镀膜的润滑与防护性能研究/Research of the Lubrication and Protection Properties |
| 碳纤维增强复合材料含孔层合板的疲劳逐步失效分析/Fatigue Progressive Failure Analysis of CFRP Laminates w |
| 纤维缠绕复合材料压力容器强度和稳定性的数值分析/Numerical Analysis of Strength and Buckling of Filament |
| 500kV复合绝缘子的研制/the development of 500kV composite insulator |
| 复合绝缘子用硅橡胶及其老化性能的研究/research of silicone rubber and its aging characteristics |
| 500kV线路复合绝缘子的电场计算及均压特性研究/Calculation of Electric-Field Distribution and Research |
| 冷轧工作辊修复用埋弧堆焊药芯焊丝的研制及其工艺的研究/Study on the Submerged Arc Hardfacing Flux-cored Wire |
| 碳纤维增强羟基磷灰石/环氧树脂复合材料研究/Research on Carbon Fiber Reinforced Hydroxyapatite/Epoxy C |
| 两种牙科氧化锆陶瓷复合材料的研究/Two zirconia-based ceramic composites for dental restoration |
| 基于弹性模量匹配的碳纤维增强硬组织生物复合材料的制备及其生物活性研究/Preparation and bioactivity study of carbon f |
| 复合材料组合圆柱壳在轴压下的屈曲和后屈曲研究/Linear eigenvalue buckling and nonlinear postbucking anal |
| 石油管材丝扣抗咬合新型复合磷化工艺的开发研究/Development on Composite Phosphating film Used in Oil Tub |
| 运行中复合绝缘子老化状况检测方法的研究/Study of Aging Evaluation Methods of Composite Insulators in |
| 铸造钢基表层复合材料的制备及其性能研究/The Fabrication and Performance Study of Cast Steel Matrix S |
| PLJ式破碎机喷射口衬板材质及工艺研究/Study on the Material and Processing for the Lining Plates |
| 原位金属间化合物增强铝基复合材料研究/Study on the Aluminum Matrix Composite Reinforced by In-situ |
| 颗粒改性复合材料宏细观变形行为的数值模拟：界面相和双向载荷影响/Numerical Simulation of the Macro- and Microscop |
| 有机硅改性环氧树脂复合体系的研究/The study of the effect of organic silicone to the composite sy |
| 木材制备SiC/Si复相材料的研究/the study of preparing of SiC/Si composite from woods |
| 新型纳米材料的生物电化学研究/Bioelectrochemical studies based on novel nanomaterials |
| 上海华源复合新材料有限公司经营战略研究/Strategic Research of Shanghai Huayuan New Composite Materia |
| 全纤维素复合材料的制备和研究/ramie fiber self-reinforced composite: process and properties |
| 木塑复合材料老化机理及其评价的研究/Study on Aging Mechanism and Durability Assessment of Wood-Pla |
| 碳纤维/乙烯基酯树脂拉挤复合材料的环境老化行为研究/EFFECTS OF ENVIRONMENTS ON PULTRUDED CARBON FIBER/VINY |
| 钢骨架增强塑料复合管的强度与变形分析/The Intensity and Deformation Analysis of the Plastic Pipe wi |
| 插层法制备新型复合发泡剂/synthesis and characterization of novel composite foaming agent by |
| 金属文物气相缓蚀剂的研制及应用研究/STUDY ON THE COMPOSITE VOLATILE CORROSION INHIBITOR FOR MEATL |
| 乙烯基酯树脂的环境老化及其碳纤维复合材料的电化学腐蚀行为研究/ENVIRONMENTAL AGING ON VINYL ESTER RESIN AND ELEC |
| Ni-P-纳米TiO2复合化学镀层的制备与性能/STUDY ON THE PREPARATION AND PROPERTIES OF Ni-P-NANO TiO |
| 橡胶基压电阻尼减振复合材料的制备/Preparation of rubber matrix piezoelectric damping composite |
| 一步法制备碳/碳复合材料/PREPARATION METHOD OF C/C COMPOSITES THROUGH ONE STEP |
| ZnO/TiO2纳米复合粉体的制备及其光催化性能研究/Synthesis of ZnO/TiO2 nano-composite powders and char |
| 新型橡胶基压电阻尼复合材料的研究/STUDY ON RUBBER-BASED PIEZOELECTRIC DAMPING COMPOSITES |
| 聚乙烯基导电复合材料性能的研究/Research of the conductive composite performance of polyethylene |
| 碳纤维环氧树脂复合材料的失效行为与机理研究/DURABILITY AND AGING MECHANISM OF CARBON FIBER EPOXY RESIN |
| 聚氨酯/纳米银复合薄膜的制备及结构与性能研究/The Preparation and Structure-Properties Study of Polyure |
| 碳纳米管增强镍基复合镀层的性能及影响因素分析/The Effect of Deposition Parameters on the Properties of |
| 柔性基础下水泥粉喷桩复合地基试验研究及有限元分析/Experimental Study And Finite Element Analysis Of DJCM |
| 混合动力汽车飞轮电池中高速复合材料飞轮的计算机辅助设计/Computer aided design of Composite flywheel with hig |
| 水下兵器复合材料胶接防渗技术研究/Study on bonding and leakproof technology for underwater weapon |
| 某型水雷复合材料耐外压壳体制造技术研究/Study on manufacture technology of composite tropedo shells |
| 复合材料船体结构静动响应和可靠性分析/Structural static and dynamic responses of ship hull built of |
| 柔性基础复合地基力学性状的分析研究/The analysis and research on mechanical behaviors of the flexi |
| FRP纤维预加张力复合原理及残余应力测量的实验研究/FRP filbers prestress composite principal and experime |
| 纤维缠绕复合材料壳体设计方法及理论研究/Theoretics study and design method of fiber enlaced composit |
| 叠合结构应用及经济分析/The application and economic analysis of composite structure |
| 复合材料高外压柱壳的结构设计与实验研究/Study of structure design and experiment of composite cylind |
| 混合动力客车飞轮电池中高速复合材料飞轮的设计与仿真/ |
| CFG桩复合地基设计方法与工程实现的研究/ |
| 聚合物基减摩耐磨复合材料研究/ |
| 直接浸渗法制备MoSi_2/SiC复合材料及材料性能研究/ |
| TZ-3Y20A/Mo叠层材料的设计与制备/ |
| 用于修复周围神经缺损的复合材料及其性能研究/Study on the composite and its properties used in repairin |
| 重型专用汽车复合材料车架计算机辅助设计研究/Research on computer aided design of composite frame of th |
| 导电复合物PANI/PMMA的制备及性能研究/Study on the preparation and property of conductive compo |
| 镍基纳米SiC复合刷镀层的制备工艺研究/Preparations techology of Ni/Nano-SiC composite coating elec |
| 光稳定性无机/有机复合微粒子的合成及应用/Synthesis and application of light stability inorganic/orga |
| CFG桩复合地基辅助神经网络设计方法研究/Research on the assistant design method of cement flyash gr |
| 0-3型压电复合材料D33的数值分析与材料优化制备/Value analyses of 0-3 type piezo-composite and The opt |
| Ag-SiO2复合薄膜的制备及其光致发光性能的研究/Investigation on the preparation and photoluminescence |
| 热压Ti_3SiC_2/Al_2O_3复合材料的制备及其性能研究/Sdudy on synthese and properties of Ti_3SiC_2/A |
| 用于神经修复的复合材料及其降解性能的研究/Study on the composite and its degradation properties used |
| 原位乳液法制备PANI/PMMA的研究/Study on the preparation of PANI/PMMA by institu emulsion po |
| 磷酸铝系透波复合材料的制备技术/The manufacture technology of aluminium phosphate electro-magnet |
| 氧化铝复合陶瓷微滤膜的研究/The study of alumina composite ceramic microfiltration membranes |
| 玻璃微珠填充聚四氟乙烯复合材料的制备及性能研究/Study of the properties and preparation of glass microba |
| 预应力钢-混凝土组合梁抗扭分析与研究/The analysis and research for torsional of prestressed steel- |
| 闭口压型钢板－混凝土组合楼板弯曲受力性能分析/Finite element analysis on bending behavior of closed pro |
| 预应力钢—混凝土组合结构非线性有限元分析研究/Nonlinear finite element analysis of composite prestresse |
| 二氧化钛-蒙脱石复合体系及其抗菌调湿的环境特性研究/Study on the composite system of TiO2-Montmorillonite |
| 纳米碳纤维增强聚合物基复合材料电磁特性研究/Study on electromagnetism characteristic of polymer compos |
| 复合材料商用车车架的CAD/CAE研究/CAD/CAE study on composite material chassis of commercial ve |
| PKPM软件中复合地基优化设计的应用研究/Optimization of composite foundation design based on PKPM m |
| 聚合物基压电阻尼复合材料的制备与性能研究/Study on the properties of piezoelectric ceramic/polymer da |
| 壳聚糖/钙磷体系复合生物多孔材料的制备与研究/Prepare and research on chitosan/calcium phosphate system |
| 无机敏化TiO2基太阳能电池光阳极材料的制备与表征/Fabrication and characterization of photoanode materia |
| 燃料电池用SPEEK/H-PTFE复合质子交换膜的制备与表征/Characterization of sulfonated poly(ether ether k |
| 燃料电池用复合质子交换膜制备与表征/Fabrication and characterization of composite membranes for po |
| 包覆式ZrB2-ZrO2超高温陶瓷的制备及其性能研究/Fabrication and analysis of coated ZrB2-ZrO2 ultra hi |
| 纳米复合含硅质子交换膜结构和性能研究/Study on structure and performance of proton exchange membra |
| 生物复合材料CaSiO3+B2O3+SrCO3+CaF2+ZnO/HA的制备及性能研究/Preparation and properties of CaSiO3 |
| Ti2AlN及Ti2AlN/TiN复合材料的合成、结构与性能研究/Synthesis, microstructures and properties of Ti |
| Cu/C/Ti3SiC2复合材料的制备与烧结性能研究/Study on fabrication and sintering properties of Cu/C |
| Al2O3-ZrO2-YAG复相陶瓷的制备及性能研究/Preparation and properities of Al2O3-ZrO2-YAG multi-p |
| 聚氨酯磁性复合微球的制备与表征/Preparation and characterization of polyurethane magnetic compos |
| 传输紫外激光空芯光纤用膜材料的合成与性能研究/Synthesis and properties of thin films for hollow-core fi |
| 全缠绕复合气瓶有限元参数化研究/Parameterized research of the fully wrapped composite cylinder b |
| PA6/PE/高岭土复合材料的制备及其界面特征的研究/Study on the preparation and interface features of PA |
| 紫外光快速固化乙烯基酯树脂及其复合材料研究/Study on UV-curing vinylester resin and composite |
| 碳纤维/乙烯基酯树脂拉挤复合材料的环境老化行为研究/EFFECTS OF ENVIRONMENTS ON PULTRUDED CARBON FIBER/VINY |
| 钢骨架增强塑料复合管的强度与变形分析/The Intensity and Deformation Analysis of the Plastic Pipe wi |
| 插层法制备新型复合发泡剂/synthesis and characterization of novel composite foaming agent by |
| 金属文物气相缓蚀剂的研制及应用研究/STUDY ON THE COMPOSITE VOLATILE CORROSION INHIBITOR FOR MEATL |
| 乙烯基酯树脂的环境老化及其碳纤维复合材料的电化学腐蚀行为研究/ENVIRONMENTAL AGING ON VINYL ESTER RESIN AND ELEC |
| Ni-P-纳米TiO2复合化学镀层的制备与性能/STUDY ON THE PREPARATION AND PROPERTIES OF Ni-P-NANO TiO |
| 橡胶基压电阻尼减振复合材料的制备/Preparation of rubber matrix piezoelectric damping composite |
| 一步法制备碳/碳复合材料/PREPARATION METHOD OF C/C COMPOSITES THROUGH ONE STEP |
| ZnO/TiO2纳米复合粉体的制备及其光催化性能研究/Synthesis of ZnO/TiO2 nano-composite powders and char |
| 新型橡胶基压电阻尼复合材料的研究/STUDY ON RUBBER-BASED PIEZOELECTRIC DAMPING COMPOSITES |
| 聚乙烯基导电复合材料性能的研究/Research of the conductive composite performance of polyethylene |
| 碳纤维环氧树脂复合材料的失效行为与机理研究/DURABILITY AND AGING MECHANISM OF CARBON FIBER EPOXY RESIN |
| 聚氨酯/纳米银复合薄膜的制备及结构与性能研究/The Preparation and Structure-Properties Study of Polyure |
| 碳纳米管增强镍基复合镀层的性能及影响因素分析/The Effect of Deposition Parameters on the Properties of |
| 含电路模拟结构吸波复合材料研究 |
| 复合地基中垫层技术及桩土相互作用 |
| SiCw/MB15复合材料的微观组织与变形断裂行为 |
| 韧性复合材料塑性极限与安定分析的机动方法研究 |
| 韧性复合材料塑性极限与安定分析的机动方法研究 |
| 复合材料层合结构接触损伤力学研究 |
| 负载型铁基复合氧化物催化苯酚羟基化合成苯二酚的研究 |
| 新型安培生物传感器的研制 |
| 新型安培生物传感器的研制 |
| 负载型铁基复合氧化物催化苯酚羟基化合成苯二酚的研究 |
| 复合材料结构的耐撞性能研究 |
| 复合材料结构的耐撞性能研究 |
| 双向载荷条件下橡胶复合材料的力学特性及其表征 |
| 聚四氟乙烯复合材料及其接头的设计理论与应用研究 |
| 新型复合胶结材料的性能及在尾矿胶结中的应用研究/STUDY ON PERFORMANCE AND APPLICATION IN TAILING CEMENTAI |
| 不锈钢－碳化硅陶瓷基复合材料的力学性能/Mechanical Properties of Stainless Steel-Silicon Carbide Cer |
| 砌块组合墙体内的相互约束作用分析/ |
| 磺化聚芳醚酮/磷酸氢锆质子交换复合膜及性能/Preparation and characterization of sulfonated poly(phthal |
| 教育电视节目制作中基于PC平台后期合成软件的比较研究/Compare Study about the post-composite Software Based |
| 多金属氧酸盐复合材料的仿生合成表征和性质研究/The Biomimetic Synth esis Characterzation and Properties |
| 介孔结构Na4W10O32/TiO2复合光催化材料的制备及其可见光光催化性能研究/Mesoporous Na4W10O32/TiO2 composite pho |
| 钒取代Keggin型钨硅酸/聚乙烯醇复合材料变色及溶胀性能的研究/Research of Changing-Colour and Swelling Capabi |
| 杂多金属氧酸盐的组装及光电功能特性的研究/ |
| 以PEO为基质的质子导电聚合物及SnO2-TiO2核壳型纳米复合材料的制备与表征/ |
| Fe/Zn复合材料及液压阻尼器抗震性能数值仿真研究/ |
| 聚乙烯／碳黑导电复合材料的PTC特性及老化行为的研究/ |
| 散体材料桩复合地基理论在电力工程中的应用研究/ |
| 我国宏观经济先行指标体系构建方法的探讨及应用/ |
| 体外预应力钢—混凝土组合梁结构行为的试验研究/ |
| 铜基减摩耐磨复合材料的制备与性能研究/ |
| 预应力锚索复合土钉墙试验研究及数值模拟/ |
| Synthesis of nanophase hydroxyapatite/collagen composite |
| Simple and effective processing route for fabricating a continuous fiber reinfor |
| Synthesis of nanophase hydroxyapatite/collagen composite |
| Simple and effective processing route for fabricating a continuous fiber reinfor |
| Optical and structural properties of nanocrystalline ZnS-SiO2 composite films |
| Anion rejection in a nitrate highly rejecting reverse osmosis thin-film composit |
| Synthesis of a nanophase, whisker-reinforced, ceramic/metal composite by electro |
| Fe3O4/Fe magnetic composite synthesized by mechanical alloying |
| Synthesis and friction behavior of chemically vapor deposited composite coatings |
| Preparation of Al-In composite nanoparticles by gas-evaporation technique |
| Reduction of CuO by Si during ball milling |
| Dye-metal oxide composite thin films for decorative applications |
| Investigation of the friction and wear properties of nanometer Si3N4 filled PEEK |
| New nanocomposite materials |
| Enhanced soft-wall effects for composite fermions in magnetic focusing and comme |
| Study on microstructure of Ag-SiO2 nanometer composite thin films |
| Nano-composite particles synthesized by a hydrogen arc plasma |
| Percolative composite model for prediction of the properties of nanocrystalline |
| Microstructure and mechanical properties for alumina/copper nanocomposites |
| Magnetic properties of Cr-added Nd-Fe-B nanocrystalline composite magnets |
| Composite nanocrystalline SiC-based material reinforced by continuous SiC fibres |
| Novel nanodisperse composite cathode for rechargeable lithium/polymer batteries |
| Buildup of composite films containing TiO2/PbS nanoparticles and polyelectrolyte |
| New metal matrix composite: Al-AlN from partially nitrided aluminum powders |
| Nano-composite resist system: a new approach to nanometer pattern fabrication |
| Photo- and Electroluminescence in SiNx(Si) Composite Nanostructures |
| Composite nanofiltration membranes prepared by in situ polycondensation of amine |
| High temperature creep behavior of nanometric Si3N4 particulate reinforced alumi |
| Solid-Phase Reaction of Mullite Formation in Nanosized Composite Films |
| Effective medium theory characterization of Au/Ag nanoalloy-porous alumina compo |
| Structural and hardness studies of CNx/TiN composite coatings on Si (100) substr |
| Investigations on the optical and mechanical properties of organic dye-metal oxi |
| Preparation and structure of Al2O3-SiO2-TiO2 composite ceramic membranes |
| Surface properties of mechanosynthesized Al2O3-Cr nanocomposite powders |
| Control of nanocomposite structure and properties using fine composite particles |
| Preparation of carbon-coated iron nanocrystals produced from Fe2O3-containing co |
| Effects of thiols on photocatalytic properties of nano-CdS-polythiourethane comp |
| Processing of a carbon nanotubes-Fe82P18 metallic glass composite |
| Hydrogen absorption properties of a mechanically milled Mg-50 wt.% LaNi5 composi |
| Preparation and dielectric properties of the functional fine composite of nano-p |
| Capacitance-voltage property of composite microsphere monolayer with polymer/Fe2 |
| Formation of wear-resistant antifriction composite coating reinforced with ultra |
| Study on the photo-induced interfacial charge transfer in TiO2/Fe2O3 heterostruc |
| Technological aspects of creation of metal powder laminates with the designed gr |
| Formation of catalytic CuLaAl11O19/Al2O3 composite powder |
| Preparation of metal-polymer composite materials using ultrasound radiation |
| Interface characterization for the in-situ wood/silica composites |
| Study on the composite method of PA6/carbon nanotube composites |
| Nanotechnological method to control the molecular weight cut-off and/or pore dia |
| Tissue response to nano-hydroxyapatite/collagen composite implants in marrow cav |
| Interfaces in analogue biomaterials |
| Study on the influence of size of Ni-P-Carbon nanotube coat on tribological prop |
| Electrical, thermal and NMR investigation of composite solid electrolytes based |
| Humidity sensors of composite material of nanocrystal BaTiO3 and polymer (R)nM+X |
| Nanostructural characteristics and sintering behavior of W-Cu composite powder p |
| Preparation and characterization of ordered nanoparticle and polymer composite m |
| Performance of aluminum-matrix composites with nanometric particulate Si-N-C rei |
| Processing and properties of nanophase SiC/Si3N4 composites |
| Study on microstructure of micron Si3N4 composite ceramic with addition of nano |
| Hydrogen storage properties of the mechanically milled MgH2-V nanocomposite |
| In situ formation of nanosized TiO2 domains within poly(amide-imide) by a sol-ge |
| Poling and properties of nano-composite thin film PT/PEK-C |
| Characterizing flux through micro- and nanostructured composites |
| Preparation, surface modification, and characterization of metallic α-Fe n |
| Formation of nano-crystalline structure at the interface in Cu-C composite |
| Microstructure and properties of carbon nanotubes/In600 composite prepared by ra |
| Sliding wear property of Cu-based composite materials reinforced by carbon nanot |
| Characterizing dielectric constants of composite of inorganic nanocrystals and p |
| Fabrication and characterization of carbon nanotube/poly(vinyl alcohol) composit |
| Optical absorption and fluorescence of a multi-walled nanotube-polymer composite |
| Study on preparation of nanosized ZrO2-TiO2 composite-oxides fine powders |
| Photoelectric properties of β-FeSi2 nano-particle-amorphous Si composite th |
| Composite of nanocrystalline hydroxyapatite and polyamide |
| Thermal behaviour of nanoporous composites |
| Resonance characteristics of Au-Ag-SiO2 composite nanoparticle films |
| Three-dimensional nano-HAp/collagen matrix loading with osteogenic cells in orga |
| Preparation and study of CoWO4-WO3 nanometer composite powders |
| Precise numerical prediction of effective dielectric constant for polymer-cerami |
| C-V characterization of α-Fe2O3/block-copolymer composite particulate film |
| Colloidal processing of mullite ceramics: Are silica-alumina `composite precurso |
| Formation of nanocrystal-amorphous Al-Ni-Y composite |
| Synthesis and characterization of photoconducting polyaniline-TiO2 nanocomposite |
| New in situ composite fabricated by powder metallurgy with aluminum and nanocrys |
| Preparation, complex mechanism and structure model of metallophthalocyanine-Fe3O |
| Hybrid and characteristic of polyaniline-barium titanate nanocomposite particles |
| Change of morphology during heating of amorphous composite powder in Si3N4-BN sy |
| Preparation of nano-titania/wollastonite composite |
| Selective uptake of cesium by ammonium tungstophosphate (AWP)-calcium alginate c |
| Synthesis of composite nanoparticle pairs |
| Study on SiO2-TiO2 composite particle |
| Crystal polymer interaction with new injectable bone substitute; SEM and Hr TEM |
| Ultrafine and nanophased powders as the fillers in composite coatings |
| Mechanical properties of a composite manufactured from non-fibrous vegetable tis |
| Preparation and characterization of PVA/SA composite nanofiltration membranes |
| Water-dispersible nanocomposites of polyaniline and montmorillonite |
| Diamond nanopowders used to improve strength of diamond- and silicon carbide-bas |
| Porosity of some commercial reverse osmosis and nanofiltration polyamide thin-fi |
| Electrochemically induced surface modification of titanols in a nanoglued titani |
| An opto-mechanical nanoshell-polymer composite |
| Synthesis and characterization of a TiAl/Ti5Si3 composite with a submicrocrystal |
| Influence of calcination temperature on thermal stability and the grain distribu |
| Preparation of CO/SiO2 composite aerogel by sol-gel process of co-containing tet |
| Resin matrix composites: Organoclay-aerospace epoxy nanocomposites, Part II |
| Self-organization mechanism in a bone-like hydroxyapatite/collagen nanocomposite |
| Anti-fretting properties of Ni/Ni-coated nano-A12O3 composite coating prepared b |
| Size dependence of non-linear optical properties of SiO2 thin films containing I |
| Preparation of polymer/graphite conducting nanocomposite by intercalation polyme |
| The grain size and surface hydroxyl content of super-hydrophilic TiO2/SiO2 compo |
| Preparation of new thermal energy storage composites material by sol-gel method |
| Tribological behavior of carbon nanotubes-reinforced nickel matrix composite coa |
| Transparent two-phase composite oxide thin films with high conductivity |
| New wear-resistant material: Nano-TiN/TiC/TiNi composite |
| Characteristics of the nanofiltration composite membranes based on PVA and sodiu |
| MMA phenomenon: Theoretical substantiation and practical application |
| Wear corrosion properties of nano-structured SiC-nickel composite coatings obtai |
| Luminescence properties from erbium oxide nanocrystals dispersed in titania/orga |
| Role of the ceramic fillers in enhancing the transport properties of composite p |
| Editorial |
| Energy storage of TiO2-WO3 photocatalysis systems in the gas phase |
| Mechanical properties of silk fibroin-microcrystalline cellulose composite films |
| Polymer metal composite particles: Polymer core and metal shell |
| Synthesis and Characterization of the Composite of Conducting Polyaniline with F |
| Preparation and Photochromic Properties of Tungstosilicate Acid/Organoamino-modi |
| Zinc oxide/polymethylmethacrylate composite microspheres by in situ suspension p |
| Preparation and characterization of NF composite membrane |
| Forming and controlling of WC-Co nonmetal-metal nano-composite structure |
| Separation of humic acid with nanofiltration polyamide composite membranes |
| Preparation, Characterization and Properties of Nano Au-TiO2 Composite Thin Film |
| Preparation and characterization of SiO2 composite membranes for purification of |
| IN-SITU synthesis and structure of nano-iron/carbon composite from petroleum res |
| Retarding effect of silica on the growth and anatase-to-rutile transformation of |
| Key factors dominating luminescent properties of a GaP nanocomposite material |
| Selective separations and hydrodynamic studies: A new approaoch using molecularl |
| Injectable premixed cement of nanoapatite and polyamide composite |
| Study on electromagnetorheological fluid containing CuPc-Fe3O4 nanoparticles com |
| Microwave absorbing property of nano Si/C/N composite powder |
| Preparation and properties of gelatin-iron oxides nano composite particles |
| Dry sliding friction and wear behavior of Cu-nanosized TiB2 in-situ composites |
| Electrical sliding wear behavior of TiB2 nanoparticles reinforced copper matrix |
| Composite coatings producing by magnetron sputtering method |
| Thermostability of Ti/Al composite powders prepared by mechanical milling |
| Friction and wear behavior of Ni-P-carbon nanotubes (CNTs) electroless composite |
| Tribotechnical polymeric composite materials based on polytetrafluoroethylene an |
| Growth and characterization of well-aligned nc-Si/SiOx composite nanowires |
| Production of nanocrystalline composite powders by nitriding of titanium and zir |
| Studies on a novel polyamide composite nanofiltration membrane II. Selectivity o |
| Polymer-ceramic composite protonic conductors |
| Formation of Zinc Oxide-Titanium Dioxide Composite Nanoparticles in Supercritica |
| In situ polymerization and nano-templating phenomenon in Nylon fiber/PMMA compos |
| Titanium metal quantum-dot composite induced by subplantation |
| Carbon nanotube/Teflon composite electrochemical sensors and biosensors |
| Effects of different whiskers on the reinforcement of dental resin composites |
| Hydrolytic stability of experimental hydroxyapatite-filled dental composite mate |
| Calcium phosphate formation and ion dissolution rates in silica gel-PDLLA compos |
| Nanomaterials. On mechanics of nanomaterials |
| Incredibly tough nanotube fibers |
| Symposium Proceedings: Membranes - Preparation, Properties and Applications, Sym |
| Developments in materials and process engineering 2002 |
| Electrophoretic deposition of ceramic coatings on ceramic composite substrates |
| Aligned Nafion [registered trademark] nanocomposites: Preparation and morphologi |
| Nanomechanical modeling of the nanostructures and dispersed composites |
| Preparation of nanosized micro/mesoporous composites |
| Electrochemical capacitor performance of hydrous ruthenium oxide/mesoporous carb |
| Composite membranes for medium-temperature PEM fuel cells |
| Nano-composite of PtRu alloy electrocatalyst and electronically conducting polym |
| Sonoelectrochemistry of molecular and colloidal redox systems at carbon nanofibe |
| Generation of metal nanoparticles on montmorillonite K 10 and their characteriza |
| A model for the composite nanostructure of bone suggested by high-resolution tra |
| Structure and hemocompatibility of polymer/carbon nanofiber composite |
| Study on injectable bioactive bone repairing material of nano-hydroxyapatite and |
| Composite polymer electrolyte prepared by a dry/wet phase-inversion process |
| Preparation of nanoscale rutile TiO2 dispersion paste and its application in TiO |
| Aggregation-Based Fabrication and Assembly of Roughened Composite Metallic Nanos |
| Effect of high content nano-thoria addition on the properties of tungsten electr |
| Dispersion and particle indication of nano-composite WC-Co powder |
| Preparation of Cu coated nano SiC composite particles by heterogeneous precipita |
| Surface topography of La-Ti composite oxide nanocrystallines examined with atomi |
| Mechanical properties and the radar wave absorbing property of carbon nanotubes |
| Dielectric properties of SiC(N)/LAS nano-composite |
| Synthesis and characterization of nano-HA/PA66 composites |
| Synthesis and biocompatibility of porous nanohydroxyapatite/collagen/alginate co |
| Tetrapod-like nano-particle ZnO/acrylic resin composite and its multi-function p |
| Optimization of a composite working electrode for a new family of electrochemica |
| Composite WO3-TiO2 photocatalyst for photodegradation |
| Synthesis and Microstructure of TiN-AlN Composite Powder by Mechanical Alloying |
| Hybrid sol-gel membranes of polyacrylonitrile-tetraethoxysilane composites for g |
| Investigation of HAP/organic polymer composite coatings prepared by electrochemi |
| Ferrofluid containing soluble conductive polyaniline and its freestanding films |
| Preparation and transmission loss of the nano-crystal and polymer composite film |
| Polyaniline/TiO2 composite nanotubes |
| Preparation and mechanical properties of rigid polymer network/nylon6 composites |
| A novel TiO2/ZrxTi1-xO2 composite photocatalytic films |
| Low-field MR behaviour in La0.67Ca0.33MnO3/ZrO2 composite system |
| The study of multiwalled carbon nanotube deposited with conducting polymer for s |
| Preparation of h-BN nano-film coated α-Si3N4 composite particles by a chem |
| Tribological properties of Ni-P-multi-walled carbon nanotubes electroless compos |
| (001) Oriented FePt-Ag composite nanogranular films on amorphous substrate |
| Laser alloying of multilayered carbon nanotubes/Ti composite on Al-alloy surface |
| Application of nano- and micro-magnetic composite particles in radiotherapy |
| A study on the friction and wear behavior of PTFE filled with acid treated nano- |
| A ferroelectric ferromagnetic composite material with significant permeability a |
| Study on polyimide/TiO2 nano-composite membrane for gas separation |
| A lotus-leaf-like superhydrophobic surface: A porous microsphere/nanofiber compo |
| Creep properties of Pb-bearing and Pb-free composite solder joints reinforced wi |
| Preparation of composite coating of amorphous Ni-P alloy with nano-Al2O3 |
| Study on the preparation of nano Ni-Al2O3 composite layer by ultrasonic-electrod |
| Study on composite of nano CaCO3/EPR/polypropylene |
| FTIR-ATR spectroscopic study of migration of nano-SiO2 particles in composite co |
| Preparation and characterization of nano-TiO2/tourmaline |
| Study of optimizing process parameters about Ni-SiC composite electrodeposition |
| Nonlinear optical and magneto-optical effects in non-spherical magnetic granular |
| Sliding wear properties of n-Al2O3/Ni electric brush plating composite coating |
| Synthesis and thermal stability of composite of conducting polyaniline with Fe3O |
| Preparation of cadmium sulfide/poly(methyl methacrylate) composites by precipita |
| Research on abrasive resistance of composite coating with different size of Al2O |
| Preparation and toughened mechanism of ZrO2/SiC-WSi2/MoSi2 nanocomposite ceramic |
| Study of frequency band gaps in metal-dielectric composite materials |
| Study on maleic anhydride grafted polyethylene/graphite electrically conductive |
| Preparation and dielectric measurement of PZT/P(VDF-TrFE) 0-3 composite |
| Morphology and structure of TiO2/SnO2 composite nanoparticles prepared in H2/Air |
| Composite of Nano-SiO2/ E-20/TEOS |
| Preparation of carboxyl-functionalized polystyrene/silica composite nanoparticle |
| Preparation of α-Al2O3/metal nano-composite powder by the heterogeneous pr |
| Structure and properties of Fe3O4/P(NaUA-St-BA) magnetic composite nano particle |
| Tissue engineering scaffold material of nano-apatite crystals and polyamide comp |
| Electrochemical capacitance of well-coated single-walled carbon nanotube with po |
| Characterization and strengthening mechanisms of nano-Al2O 3/Ni composite layer |
| Sensing properties of the ZnO based composite oxide (Al,Sb)/ZnO to C 2H5OH gas |
| Preparation and mechanical properties of carbon nanotubes/resin epoxy composite |
| Preparation and studies of skutterudite-polyaniline composite |
| Directional compounding of polyaniline on surface of NaFe4P 12 whisker |
| Effect of crystal structure of nanoparticles to the performance of chemical comp |
| Effect of silane coupling agent on the preparation and application of nano silic |
| Fabrication of Au/SiO2 nanocomposite films by self-assembly multilayer method |
| Preparation and characterization of nano-hydroxyaptite/collagen composite synthe |
| Friction and wear behavior of electroless wear-resistant and self-lubricating Ni |
| Mechanical properties and microstructure of hydroxyapatite/carbon nano-tube comp |
| Microstructure and behaviors of nano composite coating |
| Influence of VC, Cr3C2 on sintering properties of nanocrystalline WC-Co composit |
| Influence of V2O5 on properties of TiO2 nano-composite thin films |
| Preparation of nanoparticle Ni-ZrO2 composite electroplating bath |
| Narrowly dispersed micrometer-sized composite spheres based on diazonium-polysty |
| Generalized dual symmetry mechanical performance of nano magnetic composite |
| Preparation and characterization of porous YSZ-Al2O3 composite membrane |
| Preparation and characterization of n-HA/PA series biomedical composite |
| Hierarchically Biomimetic Bone Scaffold Materials: Nano-HA/Collagen/PLA Composit |
| Optical constants and dispersion of Ag-MgF2 nanoparticle composite films |
| Preparation and characterization of polypiperazine-amide composite nanofiltratio |
| Preparation of nanoscaled WO3-CuO composite powders |
| Silicon-oxygen nanocrystalline composite films (nc-SiOx:H) directly deposited by |
| Fabrication and characterization of mesoporous SnO2/ZnO- composite electrodes fo |
| Nanostructured p-n junctions for printable photovoltaics |
| Fabrication in-situ SiC nanowires/SiC matrix composite by chemical vapour infilt |
| Synthesis of composite nanoparticle material of gold and magnetic iron oxide by |
| Effect of adding Pd nanoparticles to dimercaptan-polyaniline cathodes for lithiu |
| Mg49Y15Cu36 bulk metallic glass composites synthesized by vacuum hot-pressing of |
| Controlling intermetallic compound growth in SnAgCu/Ni-P solder joints by nano-s |
| Desalination of brackish water from Tunisian Sahel using composite polymethylhyd |
| Organic-templating approach to synthesis of nanoporous silica composite membrane |
| Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and H |
| Effect of montmorillonite on the properties of thermosensitive poly(N-Isopropyla |
| In situ synthesis of TiN particulate/titanium silicide matrix composite powder b |
| Theoretical description of a delamination mechanism in fibrous micro- and nanoco |
| On the synthesis and characterization of ZSM-5/MCM-48 aluminosilicate composite |
| Comparative study between poly(p-phenylenevinylene) (PPV) and PPV/SiO 2 nano-com |
| Effect of carbon addition on the microstructure of Si3N4-Cfiber composites using |
| New multilayered nanostructured composite material produced by assembling SMA-tr |
| The synthesis of carbon nanotubes and zirconium carbide composite films on a gla |
| Structure of nanometric silica clusters in polymeric composite materials |
| Electrolytic composite nickel layers with a nano-sized Si3N4 disperse phase |
| Bioresorbable composite bone paste using polysaccharide based nano hydroxyapatit |
| Large-scale extrusion processing and characterization of hybrid nylon-6/SiO2 nan |
| Thermal and morphological studies on γ-Fe2O3 polystyrene composites and th |
| Carbon nanotubes reinforced nylon-6 composite prepared by simple melt-compoundin |
| Microstructural characterisation of an alumina/mullite composite tested in creep |
| Misfit dislocation loops in composite nanowires |
| Preparation and some properties of a nanocomposite of polyacrylonitrile with ace |
| Nanostructured Si-C composite anodes for lithium-ion batteries |
| Reversible encapsulation of nanometer-size polyaniline and polyaniline - Au-nano |
| Structures and hot deformation of Al-V2O5 mechanically alloyed composite |
| Ta-C micro-composite material formed by heat treatment of plasma carburized laye |
| Temperature and pH-responsive polymeric composite membranes for controlled deliv |
| Electrodeposition of composite iron oxide-polyelectrolyte films |
| Structure and water sorption of polyurethane nanocomposites based on organic and |
| Spectroscopic analysis of single-walled carbon nanotubes and semiconjugated poly |
| Treatment by Nanofiltration of the Bleed Stream of a Continuous Alcohol Fermento |
| A compact wireless gas sensor using a carbon nanotube/PMMA thin film chemiresist |
| The fabrication and electrical properties of carbon nanofibre-polystyrene compos |
| Plasma spray formed near-net-shape MoSi2-Si3N4 nanocomposites |
| Composite fibers made of PAN and carbon nanotubes |
| Compressive behavior of a novel aluminum metal matrix composite |
| A direct route toward assembly of nanoparticle-carbon nanotube composite materia |
| Soft-lithographically embossed, multilayered distributed-feedback nanocrystal la |
| Nano-engineered multiwall carbon nanotube-copper composite thermal interface mat |
| Ignition characteristics of metastable intermolecular composites |
| Electrospun nylon 6 nanofiber reinforced BIS-GMA/TEGDMA dental restorative compo |
| Structural study of inorganic oxides in a hybrid organic-inorganic solid polymer |
| Friction behavior of brush electroplated Ni-PTFE nano-composite coating |
| Preparation and photocatalytic study of TiO2 nano composite film |
| Synthesis and photochroism of a novel organic-inorganic nanocomposite film entra |
| Preparation and reaction mechanism of PS/SiO2 composite nanoparticles |
| Microstructure and friction and wear behavior of induction clad Ni-based composi |
| Study on fabrication of bioabsorbable reservoir control-released drug carrier |
| Microstructure and tribological properties of micro and nanostructured composite |
| Study on electroplated nickel-nanodiamond composite coating |
| Study on methane combustion catalyzed by indium-tin oxide composites |
| Preparation of industrial mineral composite powders and the application in PP co |
| Research of photocatalystic activity of nano-TiO2/polyurethane composite coating |
| Comparison between the optical properties of Ni/AAO and Co/AAO nano-array compos |
| Friction and wear properties of electrodeposited Ni-La2O3 nanocomposite coatings |
| Microstructure and contact fatigue behavior of n-Al2O3/Ni composite plating |
| Study on preparation of nanocermet Ni-AlN composite layer with method of ultraso |
| Microstructure analysis of nano-Al2O3p/Cu composite in process of recrystallizat |
| Study on preparation and properties of nano-HA/PA66/HDPE biocomposite |
| Synthesis of MoS2/carbon composite nanotubes |
| Preparation and characterization of porous scaffold made of nano-hydroxyapatite/ |
| Preparation and characterization of hydroxyapatite/collagen bone-like biomimetic |
| Preparation and characterization of silver-coated gold composite nanoparticles |
| Preparation of carbon nanotubes/HTPB and research of catalytic performance |
| Influence of sliding speed on wear resistance of nano-particles composite coatin |
| γ-ray irradiation synthesis of γ-Fe2O3/polystyrene magnetic composit |
| Preparation and photocatalytic ability of nano titanium dioxide/silk fibroin com |
| Properties of PVC/nano-CaCO3 composite resin prepared by in-situ suspension poly |
| Preparation, characterization and photoelectrochemical study of nanometer TiO2-Z |
| Preparation of nano-Ni-coated Al2O3 composite powder |
| Preparation of Ni/γ-Fe2O3 composite nanowires |
| Study on the Fe-FeAl2O4-Al2O3 composite coating synthesized by reactive plasma s |
| Low-temperature sintering mechanism of nanometer 90W-7Ni-3Fe composite powder |
| Study on characteristic of mordenite/TiO2 composite and its photocatalytic degra |
| Study on preparation and properties of EVA/SiO2 nano-composite material |
| Preparation and primary investigation of the tribological properties of ion-plat |
| Study on electromagnetic characters of MexZn1-xFe2O4 nanopowder |
| Study on PET matrix nano-antibacterial composite |
| Properties of enduring high temperature calcining of TiO2 composite oxide nanocr |
| Contact fatigue behaviors of brush electroplated n-Al2O3/Ni composite coating |
| Preparation of orientated magnetite/chitosan nano-composite material via in-situ |
| Study on properties of nano-SiO2/epoxy resin composite - (I) Preparation and ins |
| Microstructure and contact fatigue property of nano-SiO2/Ni composite coating pr |
| Preparation and characterization of chitosan/nano-hydroxyapatite composite used |
| Effects of preparation conditions on the microstructure and properties of hot pr |
| Microstructure of nanometer-sized Al2O3 composite coating prepared by electroles |
| Preparation of nano-sized W-Ni-Fe composite powder |
| Structure and biologic properties of nano-composite scaffold |
| Preparation and properties of SiCN/Sialon nanocomposites |
| Study on interfacial phase of Ti-Si-N composite films |
| Preparation of PMMA-SnO2 composite nanospheres and investigation on acting as ad |
| Preparation and micro mechanical properties of nano-Al2O3 particles reinforced N |
| Effects of Al2O3 nanoparticle content on structure and sliding wear behavior of |
| Effects of nanoscale oxide particles on structure and property of PVDF hollow fi |
| Tracking resistance of composite insulation of RTV silicone rubber with nano-lay |
| Effect of lubricating condition on tribological properties of Nano-SiO2 filled p |
| Study on surface morphology, microstructure and properties of Ni-ZrO2 nano-compo |
| Coercivity mechanism of segmented (AIB)m composite nanowire arrays |
| Microwave absorbing property of nano-Fe3O4/BaTiO3 composite system |
| Study on friction and wear properties of two Ni-based alloys at elevated tempera |
| Investigation of antibacterial characteristics of magnesium oxide and its nano-c |
| Advances in synthesis of micro-mesoporous composite molecular sieves |
| Study on carbon nanotubes/magnesiuum matrix composites by stir-casting |
| Development of nanometer TiO2 composite materials |
| Performance and structure of composite zeolite/TiO2 photocatalyst with ultrasoni |
| Research on nano-composite energetic materials |
| Photoconductivity of CdS nanorods/TiOPc composite photoconductors |
| Preparation and characteristics of nano-Ni/polyaniline nanocomposite particles |
| Preparation of nanometer NiO/Al composite particle |
| Processing of dispersing of Nano-ZrO2 particles and SiC whisker uniformly mixed |
| Studies on methanol permeation and proton conductivity of phosphotungstic acid d |
| Electrochemical reduction of CO2 on RuO2/TiO 2 nanotubes composite modified Pt e |
| Surface modification of nano-SiO2 particles using polyaniline |
| Fabrication of an in-situ nano-Al2O3Cu composite with high strength and high ele |
| Preparation and characterization of nano-hydroxyapatite/chitosan composite scaff |
| Preparation of TiO2-MoO3 nano-composite photo-catalyst by supercritical fluid dr |
| Electrocatalytic oxidation of formic acid on platinum particles dispersed in SWN |
| In situ composite of nano SiO2-P(VDF-HFP) porous polymer electrolytes for Li-ion |
| Feasibility of Al/Al2O3 composite particles prepared by semi-solid mechanical st |
| Fabrication of a composite nano-ultrathin film of poly-phenylene-vinylene and C6 |
| Studies of Fe-doped SiO2/TiO2 composite nanoparticles prepared by sol-gel-hydrot |
| Preparation and characterization of a kind of composite phase change material ba |
| Studies on the porous scaffold made of the nano-HA/PA66 composite |
| Highly dispersed multi-walled carbon nanotubes in water/ethanol and its applicat |
| Optical resonant absorption and third-order nonlinearity of (Au,Ag)-TiO2 granula |
| Characterization of Al2O3-Al nano-composite powder prepared by a wet chemical me |
| Manganese oxide/MWNTs composite electrodes for supercapacitors |
| Preparation of Al2O3 - SiO2 - TiO2 - ZrO2 composite ceramic membranes by Sol-Gel |
| Preparation and in vitro investigation of chitosan/nano-hydroxyapatite composite |
| Friction and wear characteristics of brush plating composite coating under sand- |
| Morphological characterization of PMMA/PAN composite particles in nano to submic |
| Dielectric properties of SiC/LAS composite |
| Double-layered composite nanofibers and their mechanical performance |
| Electrical prestressing of high-electric-field conduction in composite of low-de |
| Preparation and characterization of Ag2S nanoparticles embedded in polymer fibre |
| Preparation of nanosized W/Cu composite powder by sol-gel technique |
| A novel structural mesoporous alumina/yttrium doped zirconia nanocrystalline com |
| Optical properties of ferroelectric nanocrystal-containing polymer BaTiO3 polyca |
| Preparation of crosslinked composite nanoparticles |
| Preparation of dysprosium ferrite/polyacrylamide magnetic composite microsphere |
| Electrochemical capacitance characteristics for nano-NiO/C composite electrode |
| Low methanol permeable composite Nafion/silica/PWA membranes for low temperature |
| Crosslinkable composite spheres and capsules synthesized by heterocoagulation |
| High strength lead-free composite solder materials using Nano-Al 2O3 as reinforc |
| New methods of fabrication of metal-matrix composites on the base of usage of na |
| Metal-oxidized graphite composite electrodes for lithium-ion batteries |
| Fouling resistant membranes in desalination and water recovery |
| Dielectric enhancement in polymer-nanoparticle composites through interphase pol |
| Some experimental results on polyN-vinylcarbazole-buckminsterfullerene (C60) nan |
| Metal-oxide-SiO2 composite ZnO lasers |
| Catalytic effect of Ni nano-particle and Nb oxide on H-desorption properties in |
| Fabrication of Au/titania composite nanodot arrays from au-loaded block copolyme |
| Controlled syntheses of Ag-polytetrafluoroethylene nanocomposite thin films by c |
| Synthesis and characterization of monodispersed polymer/polydiacetylene nanocrys |
| The preparation and characteristics of a carbonated hydroxyapatite/collagen comp |
| Formation of Ti-Si composite oxide films on Mg-Al-Zn alloy by electrophoretic de |
| Deformation processes of ultrahigh porous multiwalled carbon nanotubes/polycarbo |
| Fabrication of nanoparticle composite porous films having ultralow dielectric co |
| Nano-structured Li-ionic conductive composite solid electrolyte synthesized by u |
| Technique to make nano carbon tubes buried inside rubber composite visible using |
| Pulse electric current sintering of transition alumina/zirconia composite powder |
| Preparation and electrochemical performance of composite oxide of alpha manganes |
| Optically transparent composites reinforced with networks of bacterial nanofiber |
| Composite magnetic particles: 2. Encapsulation of iron oxide by surfactant-free |
| Structural transitions of lipid monolayers on metallic nanoparticles |
| A self-supporting electrode for supercapacitors prepared by one-step pyrolysis o |
| Improvement in biocompatibility of ZrO2-Al2O 3 nano-composite by addition of HA |
| Controlled polymerization in mesoporous silica toward the design of organic-inor |
| Nonlinear optics in mesoscopic composite materials |
| Synthesis of ultrafine TaC-5 wt.% Co composite powders by the spray-carbothermal |
| Self-assembled DNA composite membranes |
| Electrochemical and microstructural characterization of polymeric resin-derived |
| Frictional properties of multilayered and titanium-carbon-based composite coatin |
| The wear behaviour of Ni-Al2O3 composite coatings prepared with different concen |
| Developing and studying the properties of Pb-TiO2 alloy coated lead composite an |
| Processing of hydroxyapatite reinforced ultrahigh molecular weight polyethylene |
| Complex adhesion effects of inorganic Nanofillers vs Microfillers in polymer com |
| Structural aspects of annealing and hot deformation of Al-Nb 2O5 mechanically al |
| Optical characteristics of gold nanoparticle-doped multilayer thin film |
| Preparation and characterization of polyaniline-containing Na-AlMCM-41 as compos |
| EPR and physicochemical properties of nanodispersed diamond-based composite mate |
| TiN-NCD composite coating produced on the Ti6Al4V alloy for medical applications |
| Nanostructured proton-conducting membranes for fuel cell applications |
| Soft magnetic nanocomposite with powdered metallic ribbon based on cobalt and po |
| Photocatalytic degradation of phenol on MWNT and titania composite catalysts pre |
| Gold-conductive polymer nanoparticles: A hybrid material with enhanced photonic |
| Visible light photodegradation of phenol on MWNT-TiO2 composite catalysts prepar |
| Nanostructured porous sol-gel materials for applications in solar cells engineer |
| Temperature dependences of static mechanical properties of an MDK-3 laminated co |
| Carbon nanotube-polymer nanocomposites: The role of interfaces |
| Simulations of composite carbon films with nanotube inclusions |
| Structure and properties of nanocrystalline soft magnetic composite materials wi |
| Composite polymer nanofibers with carbon nanotubes and titanium dioxide particle |
| Layer-by-layer assembly of nacre-like nanostructured composites with antimicrobi |
| Hydrogen storage properties of magnesium based nanostructured composite material |
| Highly conducting carbon nanotube/polyethyleneimine composite fibers |
| Polyaniline/carbon nanotube composites: Starting with phenylamino functionalized |
| Improving the damping properties of composites using ferroelectric inclusions |
| Soft plastic robots and artificial muscles |
| Synthesis and characterization of nano-composite lead-free solder |
| Oxidative stabilization of PAN/SWNT composite fiber |
| Materials progress: Copper/carbon-nanotube composite manages high heat |
| Collagen-carbon nanotube composite materials as scaffolds in tissue engineering |
| Multicomponent patterning of layer-by-layer assembled polyelectrolyte/nanopartic |
| Mechanical properties modeling of carbon single-walled nanotubes: An asymptotic |
| Influences of the deposition rate on the microstructure and hardness of composit |
| Application of nanocrystalline materials as matrices of composites: processing a |
| Densification and microstructure development of alumina/Y-TZP composite powder ( |
| Hard magnetic behaviours of composite materials of the iron nanoparticles and HD |
| Superhard nanocrystalline composite materials: the TiN/Si3N4 system |
| Microstructure development of Si3N4-TiN composite prepared by in situ compositin |
| TiO2-polymer nanocomposites by sol-gel |
| Synthesis of aluminosilicate composite membranes |
| Femtosecond nonlinear absorption in a novel polyaniline nanocluster composite |
| Optical and structural properties of nancrystalline ZnS-SiO2 composite films |
| Nano-phase W and W-Ti composite via gas-phase combustion synthesis |
| Synthesis and microstructure of nanostructured Al/Al2O3 (H)-composite |
| Nanometre sized SiC particulates reinforced Al base composite material |
| Composite of polyaniline containing iron oxides with nanometer size |
| Using simultaneous deposition and rapid growth to produce nanostructured composi |
| Synthesis of nanostructured composite materials in the B-Si-N system |
| Porous nickel oxide/nickel films for electrochemical capacitors |
| Nanometric Si3N4 particulate-reinforced aluminum composite |
| Synthesis of superhard carbon nitride composite coatings |
| The effect of particle size of nanometer ZrO2 on the tribological behaviour of P |
| Tungsten “dye” induced fast blue/violet photoluminescence from nanoc |
| A TEM study of Al-based nanophase composite |
| Superhard nanocrystalline W2N/amorphous Si3N4 composite materials |
| Nanoindentation behavior of a two-dimensional carbon-carbon composite for nuclea |
| Synthesis and properties of a Bi2Sr2CaCu2Ox-BaTiO3 composite powder |
| Microstructure and properties of spray-deposited 2014+15 vol pct SiC particulate |
| Structure and deformation behavior of carbon nanotubes reinforced nanocrystallin |
| TiO2 nano-particle-dispersed polyimide composite optical waveguide materials thr |
| Sensitivity of the Ag/SiO2 mesoporous composite on ambiences in the optical abso |
| Atomic force microscopy study of diamond-like atomic-scale composite films |
| Stepwise assembly in three dimensions: preparation and characterization of layer |
| Preparation and characterization of Ag-TiO2 hybrid clusters powders |
| Reduction and sintering of a nickel-dispersed-alumina composite and its properti |
| Experimental evidence for composite fermions |
| Optical properties of composite films of Si produced by laser deposition |
| Theory of composite BxCyNz nanotube heterojunctions |
| Aluminium oxide-poly(vinyl acetate) composite electrolyte for electrochromic dev |
| Pulse-reverse plating of nanocomposite thin films |
| Sol-gel control of the micro/nanostructure of functional ceramic-ceramic and met |
| Thermal stability of submicrocrystalline copper strengthened with HfO2 nanoparti |
| Importance of ideal grain boundaries of high remanent composite permanent magnet |
| Processing of ductile carbon nanotube/C60 composite |
| Synthesis of “a β-SiC nanorod within a SiO2 nanorod” one dimens |
| Photoconductivity of an inorganic/organic composite containing dye-sensitized na |
| The preparation of carbon-coated iron nanocrystals produced from Fe2O3-containin |
| Superplasticity of ZrO2 and ZrO2/Al2O3 composite consisting of nano-sized grains |
| Synthesis and thermal stability of SiC-Si3N4 composite ultrafine particles by la |
| Processing of carbon nanotube reinforced aluminum composite |
| Nonresonant optical nonlinearity of ZnO composite nanoparticles with different i |
| Elastic modulus of nano-alumina composite |
| Preparation and characterization of Al2O3-TiO2 composite oxide nanocrystals |
| On the phase composition of polymethylsiloxane derived ceramics |
| Hydriding and electrochemical characteristics of a homogeneous amorphous Mg2Ni-N |
| Fabrication and characterization of concentric-tubular composite micro- and nano |
| Electrical characterization of electroluminescent polymer/nanoparticle composite |
| Percolation-dominated conductivity in a conjugated-polymer-carbon-nanotube compo |
| The preparation of metal-polymer composite materials using ultrasound radiation |
| Multiscale investigation of the creep behaviour of a 2.5D Cf-SiC composition |
| Encapsulation of filaments of a self-assembling bicopper complex in polymer nano |
| A composite of nanocrystalline hydroxyapatite and polyamide |
| Silica sol as a nanoglue: flexible synthesis of composite aerogels |
| Modes of deformation in a soft/hard nanocomposite: a SANS study |
| A high capacity nano-Si composite anode material for lithium rechargeable batter |
| Nanotube composite carbon fibers |
| Nonlinear optical absorption of InAs nanocrystals embedded in SiO2 thin films |
| The preparation and characterization of composite nanocrystalline SnO2/Fe2O3 |
| Characterization of nanoscale property variations in polymer composite systems. |
| Preparation of ZnO conductive ceramics and its properties |
| Humidity sensors of composite material of nanocrystal BaTiO3-Jk and polymer (R)n |
| Study of the photophysical properties of composite film assembled of porphyrin a |
| Preparation of carbide alloy composite powders containing vanadium in ultrafine |
| Preparation of nanomic oxide composite powders of (W,Ni,Fe,V) system for carbide |
| A study on preparation of nanosized ZrO2-TiO2 composite-oxide fine powders |
| Grain growth and phase stability in a nanocrystalline ZrO2-15 w% Al2O3 ceramic |
| Preparation of zinc oxide-dispersed silver particles by spray pyrolysis of collo |
| A new CVD route for the synthesis of composite diamond-based materials |
| Magnetomechanical damping in a nanocrystalline two-phase composite |
| Interfacial phenomena in the SiC/2014Al composite: (I) modification of interfaci |
| Relaxation of photodarkening in SiO-As2(S,Se)3 composite layers |
| On the nature of Li insertion in tin composite oxide glasses |
| Remanence enhancement in nano-structured composite magnets |
| Gas sensitivity of composite Langmuir-Blodgett films of Fe2O3 nanoparticle-coppe |
| Charge transport in CdSe nanocrystalline sublayers of SiOx/CdSe multilayers and |
| Temperature dependence of the conductivity of Cu:SiO2 composite films. Experimen |
| Synthesis of GaN-carbon composite nanotubes and GaN nanorods by arc discharge in |
| Influence of cycling on the thermodynamic and structure properties of nanocrysta |
| Observation of size oscillations in poly(ethylene) glycol/electrolyte composite |
| Microstructure and fracture mechanism of Si3N4 composite ceramic materials |
| Nanostructured composite films grown by ion beam assisted deposition in computer |
| Observation of site selective binding in a polymer nanotube composite |
| Preparation of gold/triblock copolymer composite nanoparticles |
| Study on nanosized TiO/ WO3 thin films achieved by radio frequency sputtering |
| Study on the complex mechanism and properties of phthalocyanine copper Fe3O4 nan |
| From Ga(NO3)3 to nanocrystalline GaN: confined nanocrystal synthesis in silica x |
| SiC/Si3N4 nano/micro-composite-processing, RT and HT mechanical properties |
| Laser-irradiation effects during Z-scan measurement on metal nanocluster composi |
| Current-induced suppression of superconductivity in a three-dimensional lattice |
| Processable polyaniline-titanium dioxide nanocomposites: effect of titanium diox |
| Coating of carbon nanotubes with tungsten by physical vapor deposition |
| Engineering magnetic nanocomposite microstructures |
| Hydrogenation characteristics of Mg-TiO2 (rutile) composite |
| Colloidal processing of mullite ceramics: Are silica-alumina “composite&rd |
| Understanding the creep behavior of a 2.5D Cf-SiC composite-I.. Morphology and m |
| Magnetic viscosity in a nanocrystalline two phase composite with enhanced remane |
| Ni-composite microencapsulated graphite as the negative electrode in lithium-ion |
| Load transfer and deformation mechanisms in carbon nanotube-polystyrene composit |
| A study on synthesis and mechanical properties of WC-TiN superhard composite fil |
| Synthesis of tailored composite nanoparticles in the gas phase |
| Synthesis of high density ultrafine W/Cu composite alloy by mechano-thermochemic |
| The nano-scratch technique as a novel method for measurement of an interphase wi |
| Study of ferric oxide nanoparticles-tris-(2,4-di-t-amylphenoxy)-(8-quinolinolyl) |
| Plasticized PVC reinforced with cellulose whiskers. II. Plastic behavior |
| The use of diamond nanopowders to strengthen a diamond-SiC composite material |
| Design and tailoring of Ni-Sn-W composites for bonded abrasive applications |
| Microwave absorptive behavior of ZnCo-substituted W-type Ba hexaferrite nanocrys |
| Prediction of new growth points for composite materials in the 21st century |
| Tailoring advanced nanoscale materials through synthesis of composite aerogel ar |
| Preparation of silver nanoparticles composite films and measurement of its optic |
| Dispersed microstructure model and effective dielectric function for three-compo |
| Characterization of single walled carbon nanotubes-PMMA composites |
| Enhancement of χ3 in nanoparticle composite media exhibiting electrostrictio |
| Electrically conductive polymer/metal oxide composite electrodes for oxygen redu |
| Dispersion of graphite nanosheets in a polymer matrix and the conducting propert |
| Structure and performance of γ-alumina washcoat deposited by plasma sprayi |
| Pyrolysis-a good method to produce nanomaterials. I |
| Precipitation of multilayered core-shell TiO2 composite nanoparticles onto polym |
| Thermal stability, grain growth and structure changes of mechanically alloyed W- |
| Preparation of polystyrene-graphite conducting nanocomposites via intercalation |
| Structural analysis of composite metal-insulator materials by small-angle X-ray |
| Dielectric properties of nano Si/C/N composite powder and nano SiC powder at hig |
| Blue photoluminescence from SiC nanoparticles encapsulated in ZSM-5 |
| Microwave permittivity of nano Si/C/N composite powders |
| A conducting nanocomposite of poly(N-vinylcarbazole) with buckminsterfullerene |
| The surface enhanced Raman scattering effects of composite nanocrystals of Ag-Ti |
| Study of electroless Ni-P-nanometer diamond composite coatings |
| The transmission loss of nano-crystal and polymer composite thin film PT/PEK-c |
| An investigation of the sliding wear behavior of Cu-matrix composite reinforced |
| Property analysis and humidity sensitivity of the composite material of BaTiO3 a |
| Temperature dependence of giant magnetoresistance in CoAg granular composite |
| Interaction of high-power laser pulses with glasses containing implanted metalli |
| Structural and hydriding properties of composite Mg-ZrFe1.4Cr0.6 |
| A new type of amperometric oxygen sensor based on a mixed-conducting composite m |
| Fabrication of Al2O3/ZrO2 micro/nano-composite prepared by high energy ball mill |
| Spectral sensitivity enhancement by thin film of β-FeSi2-Si composite prepa |
| Elastic modulus of pulse electrode surface deposited composite boride coating us |
| The liquid-enhanced plasticity and deformation behavior of Cu-Mg-TiC nanocrystal |
| Preparation and characterization of gold-titania nanoparticles |
| Development of nano-porous SnO2/ZnO composite electrode for efficient dye-sensit |
| Luminescence properties from erbium oxide nanocrgstals dispersed in titania/orga |
| Interfacial characteristics of a carbon nanotube-polystyrene composite system |
| Preparation of Au/ZnO nanocomposites by radio frequency co-sputtering |
| Photoluminescence characteristics of neodymium oxide nanocrystal/titania/ormosil |
| Electron microscopical characterization of Sn/SnSb composite electrodes for lith |
| Nanostructured tungsten-based composite coatings and their applications |
| Synthesis and structural properties of Al-C-N-O composite thin films |
| Coexisting photoluminescence of Si and Ge nanocrystals in Ge/Si thin film |
| Hydrogen sorption properties of an Mg-Ti-V-Fe nanocomposite obtained by mechanic |
| Polymer nanocomposites: status and opportunities |
| Organic-templating approach to synthesis of nanoporous silica composite membrane |
| Carbon-nanofibre-reinforced poly(ether ether ketone) composites |
| Arthropod cuticle: a natural composite shell system |
| An efficient solid-state laser based on a nanoporous glass-polymer composite dop |
| Sulfonated polybutadiene ionomer templates nanonickel composite |
| Mechanochemical synthesis of nanocrystalline TiN/TiB2 composite powder |
| Field-independent grating formation rate in a photorefractive polymer composite |
| Optical confinement of a laser radiation in the 3.8-4.2 μm range in a composi |
| Sulfonated polybutadiene random ionomer as stabiliser for colloidal copper nanop |
| Effect of annealing on chemically deposited Bi2Se3-Sb2Se3 composite thin films |
| Magnetization reversal process and nonlinear magneto-impedance in Cu/NiFe and Nb |
| Triode-type field emission array using carbon nanotubes and a conducting polymer |
| Sulfonated polybutadiene ionomer-templated nanocopper composites |
| Study of the temperature dependence of giant magnetoresistance in metallic granu |
| Properties of hydriding and dehydriding of nanocrystalline composite of Mg-Ni-Cr |
| Electroless preparation and tribological properties of Ni-P-carbon nanotube comp |
| Study on the electrical properties of PEO-nanosized ZnO composites |
| Amorphous-to-crystalline transformation induced by thermal annealing of a metast |
| Wear and friction of Ni-P electroless composite coating including inorganic full |
| Mechanical properties of Nb-18Si-5Mo-5Hf-2C in-situ composite prepared by arc-ca |
| Micromechanical properties of high fracture performance SiCp-6061Al/6061Al compo |
| Enhancement of electrochemical characteristics of Mg2Ni/MmNi5-x(CoAlMn)x by form |
| Refractive index dispersion measurement on nano-crystal and polymer composite Bi |
| Wear resistance of Ni/nano-Al2O3 composite coatings plated by composite brush pl |
| Preparation of cordierite/ZrO2 nano-composite powders by a colloidal coating pro |
| Microstructure and wear resistance of gradient composite coating of cast WCp/Ni |
| Humidity sensors based on composite material of nano-BaTiO3 and polymer RMX |
| Initial images of complete breakdown of liquid nitrogen/polymer film |
| Nanocrystalline FeMoSiB/Ni laminate composite-preparation and mechanical propert |
| A study on the preparation of polymer/montmorillonite nano-composite materials b |
| Multishell fullerenes by laser vaporization of composite carbon-metal targets |
| Ferrite/metal composites fabricated by soft solution processing |
| Deposition of diamond/β-SiC gradient composite films by microwave plasma-as |
| Sulfur-carbon nano-composite as cathode for rechargeable lithium battery based o |
| Solid-state room-temperature route to silver composite nanowires |
| Plasma spray forming of nanostructured composite coatings |
| Dielectric properties of composite diamond films |
| Electron transport in composite multiple-barrier magnetic nanostructures |
| Morphology development of CdS/PVAc composite from spheres to rods |
| Electrochemical hydrogen discharge properties of MgNi-carbon nanotube composites |
| Syntheses of perovskite-type composite oxides nanocrystals by solid-state reacti |
| Structures, properties and responses to heat treatment of deformation processed |
| Photoluminescence properties of silicon nanowires and carbon nanotube-silicon na |
| Silica-carbon nanocomposites-a new concept for the design of solar absorbers |
| Al2O3p/Al composites with compatible interface by matrix alloying |
| Magnetic behavior of antiferromagnetic and composite ferro-antiferromagnetic nan |
| Morphology and failure in nanocomposites. II. Surface investigation |
| Comparison of three types of carbon composite coatings with exceptional load-bea |
| Piezoelectric properties of collagen-nanocrystalline hydroxyapatite composites |
| Influence of the degree of severe plastic strain and heating on the structural e |
| Interface characterisation and correlation with the creep behaviour of a 2.5D Si |
| Creep mechanism of SiCN-derived nano/micro composite |
| Novel composites of TiO2 (anatase) and silicate nanoparticles |
| Effect of SiC size dimensions on the corrosion wear resistance of the electrodep |
| The study of lithium insertion-deinsertion processes into composite graphite ele |
| Preparation of nanocrystalline composite powders by nitriding of titanium and zi |
| Synthesis of nanoporous metal oxide particles by a new inorganic matrix spray py |
| Structure and ionic interactions of organic-inorganic composite polymer electrol |
| Composite doped emeraldine-polyethylene oxide-bonded lithium-ion nano-tin anodes |
| Independent optically addressable nanoparticle-polymer optomechanical composites |
| Reduced polymerization stress through non-bonded nanofiller particles |
| Synthesis of PMMA-ceramics nanocomposites by spray process |
| Friction and wear scar analysis of carbon nanofiber-reinforced polymeric composi |
| Vanadium oxide-carbon nanotube composite electrodes for use in secondary lithium |
| Improvement in electrochemical properties of nano-tin-polyaniline lithium-ion co |
| Polyaniline-gold nanocomposite system |
| Modeling properties of nylon 6/clay nanocomposites using composite theories |
| Dose dependence of surface plasmon resonance of a Ti-SiO2 nanoparticle composite |
| Poly(vinyl alcohol)/SWNT composite film |
| Plasmon modes and negative refraction in metal nanowire composites |
| A study on the friction and wear behavior of PTFE filled with alumina nanopartic |
| An investigation of nanoparticles addition on solidification kinetics and micros |
| The stress-strain behavior of polymer-nanotube composites from molecular dynamic |
| Sonochemical modification of the superconducting properties of MgB2 |
| Enhanced mechanical properties of polyacrylonitrile/multiwall carbon nanotube co |
| Multifunctional structural reinforcement featuring carbon nanotube films |
| Nanomechanics of carbon nanotubes and composites |
| Studies of the optical properties of metal-pliable polymer composite materials |
| Solid-state photovoltaic thin films using TiO2, organic dyes, and layer-by-layer |
| Electrical and optical properties of ceramic-polymer nanocomposite coatings |
| Instrumented indentation characterization of laser-induced Fe3O4/Al composite co |
| Carbon nanotube/PMMA composite thin films for gas-sensing applications |
| Nanofiber-reinforced polymers prepared by fused deposition modeling |
| Micromechanical properties of a laser-induced iron oxide-aluminum matrix composi |
| Second-harmonic generation in arrays of spherical particles |
| Carbon nanotube and polyaniline composite actuators |
| Enhancements in conductivity and thermal and conductive stabilities of electropo |
| Preparation and morphology of niobium oxide fibres by electrospinning |
| Dynamic mechanical behavior of in situ functionalized multi-walled carbon nanotu |
| Kinetics of electroplating process of nano-sized ceramic particle/Ni composite |
| Blue shift of plasmon resonance in Cu and Ag ion-exchanged and annealed soda-lim |
| Rheological behavior and fatigue of aluminium oxide-based composite structures o |
| Transmission and reflection properties of composite double negative metamaterial |
| Wide photonic band gaps at the visible in metallic nanowire arrays embedded in a |
| Processing and characterisation of a fine nickel oxide/zirconia/composite prepar |
| ``Surface modifications of carbon nanotube/polyacrylonitrile composite films by |
| Radio frequency (RF) suspension plasma sprayed ultra-fine hydroxyapatite (HA)/zi |
| Second harmonic generation from a collection of nanoparticles |
| Optical properties of a composite with silver nanoparticles in the 8-12-μm re |
| Al-Mn-Ce quasicrystalline composites: phase formation and mechanical properties |
| Effects of heat treatment on the structure of thermal plasma synthesized SiCN co |
| Fullerene-containing C60-CdTe(CdSe) composite nanostructures |
| Information analysis of special features of the nanostructure of C60-CdTe compos |
| Novel Ti-base nanostructure-dendrite composite with enhanced plasticity |
| Hot-pressed, dry, composite, PEO-based electrolyte membranes. I. Ionic conductiv |
| CdSe/CdS core/shell quantum dots as sensitizer of a photorefractive polymer comp |
| Fabrication of W-20 wt% Cu composite nanopowder and sintered alloy with high the |
| Frequency dependent electrical transport between conjugated polymer and single-w |
| Optical nonlinearity of nanocrystalline Au/ZnO composite films |
| Hydrogen adsorption/desorption property of advance composite Mg/MWNTs |
| The influence of interphase on nylon-6/nano-SiO2 composite materials obtained fr |
| Temperature-sensitivity of coating copper on sub-micron silicon carbide particle |
| Helium gas permeability of SiC/SiC composite developed for blanket component |
| Synthesis and characterization of SnO-carbon nanotube composite as anode materia |
| Large third-order optical nonlinearity of SnO2/PVA composite thin film measured |
| Sintering of nanocrystalline WC-Co composite powder |
| Preparation of PPS-based nanometer composite dielectric and its properties |
| Preparation of nanometer composite particles with inorganic surface modifier |
| Fabrication and application of smooth composite diamond films |
| Preparation and performance of NiCuZn-Co2Y composite ferrite material |
| Research on nano-composite ferrite absorber |
| Microwave absorbing properties of nanocrystalline BaFe12O19 composite material |
| Effects of nanosized metallic palladium loading and calcination on characteristi |
| Functional nano-array materials: fabrication, properties and applications |
| Fiber mats of poly(vinyl alcohol)/silica composite via electrospinning |
| Thermal stability of composite of nanocrystalline WC powder and carbon nanotubes |
| Surface modification of TiO2 nanoparticles by polyaniline |
| Friction and wear behavior of electroless Ni-based CNT composite coatings |
| Correlation between microstructural and electroluminescent properties of Ge-SiO2 |
| Electrochemical behavior of the polyaniline-organosulfur composite film containi |
| Nano-composite TiO2-PI via sol-gel process |
| Monodispersed polydiacetylene-polystyrene composite particles |
| Enhanced off-resonance optical nonlinearities of Au@CdS core-shell nanoparticles |
| Synthesis of double-walled carbon nanotubes from tetraethoxysilane |
| Carbon nanofiber-copper composite powder prepared by electrodeposition |
| Surfactant-mediated synthesis of a novel nanoporous carbon-silica composite |
| Photoluminescence properties of the composite of porous alumina and poly (2,5-di |
| Granular composite magnetoresistance device based on high temperature supercondu |
| A study on nano-composite of hydroxyapatite and polyamide |
| Research of computer-controlled CVD diamond growth system |
| New materials from non-intuitive composite effects |
| A novel method for preparing Co3O4 nanofibers by using electrospun PVA/cobalt ac |
| Surface treatment mechanism of nano-SiO2 and the properties of PP/nano-SiO2 comp |
| Sulfur composite cathode materials for rechargeable lithium batteries |
| Preparation and characteristics of flexible carbon composite film |
| Carbon nanotube composite deposits with high hardness and high wear resistance |
| Research on liquid crystal light valve with composite film photoconductor |
| Tribological application of carbon nanotubes in a metal-based composite coating |
| Interface and surface properties of nano-hydroxyapatite/poly(1,4-phenylene-sulfi |
| Electrospun nanofibers of NiO/ZnO composite |
| Characterization and strengthening mechanisms of nano-AI2O3/Ni composite layer |
| Single-walled carbon nanotubes coated with titania nanoparticles |
| Composite ceramic-metal coatings by means of combined electrophoretic deposition |
| Study on carbon nanotubes/manganese dioxide composite electrode materials for su |
| Fabrication and characterization of nanometer CaP(aggregate)/Al2O3 composite coa |
| In situ synthesis of bone-like apatite/collagen nano-composite at low temperatur |
| A new technique for preparing macroporous inorganic composite material |
| Preparation of nanometer ZnO-TiO2 composite powder with the method of common pre |
| Study of nanometer ZnO reinforced PTFE |
| Capacitive characteristics of activated carbon/carbon black composite electrode |
| Preparation of polystyrene core-mesoporous silica nanoparticles shell composite |
| Research of the microstructure of nanometer metal/polymer composite |
| Study on the properties of a nanocrystal and polymer composite PbTiO3/PEK-c film |
| Preparation of epoxy-functionalized polystyrene/silica core-shell composite nano |
| Preparation and properties of Ni/P/single-walled carbon nanotubes composite coat |
| A novel luminescent property from composite of ZnS nanocrystallites and organic |
| Structure and properties of regenerated cellulose/tourmaline nanocrystal composi |
| Evaluation for cell affinity of the composite material containing carbon nanotub |
| The fabrication and the coercivity mechanism of segmented (Ni/Fe)m composite nan |
| Optical properties of ordered Co/AAO nano-array composite structure |
| Influence of sintering technique on mechanical properties and microstructure of |
| Linear and nonlinear optical properties of Ag nanorods/AAM composite films |
| Synthesis and thermoelectric properties of CoSb3/C60 composites |
| Al2O3/Fe2O3 composite-coated polyhedral Fe nanoparticles prepared by arc dischar |
| Strongly nonlinear electronic transport in Cr-Si composite films |
| Sintering densification behavior of nano-grained WC-10Co composite powders |
| Study on position of electrode-plates based on the effect of SiC content in Ni-S |
| Phases interface in deformation processed Cu-15 wt.%Cr composite prepared by ele |
| Preparation of Ni-CNT composite coatings on aluminum substrate and its friction |
| Preparation and characterization of Fe/Au core-shell composite nanoparticles |
| Study of acrylate/barium titanate nanocomposite |
| All solid-state rechargeable lithium cells based on nano-sulfur composite cathod |
| Effect of Al2O3 on structure and wearability of composite coating |
| Hydrous manganese oxide/carbon nanotube composite electrodes for electrochemical |
| Novel tubular composite carbon-zeolite membranes |
| Preparation and electrochemical hydrogen storage properties of Au-carbon nanotub |
| Reduction procedure study on W-Ni-Fe composite oxide powder |
| Mechanical mixing and wear-debris formation in the dry sliding wear of copper ma |
| Fabrication of polymer-nanoparticle composite inverse opals by a one-step electr |
| Preparation and characterization of coated nanoscale Cu/SiCp composite particles |
| Preparation of SiO2/TiO2 composite particles hydrolysis |
| Synthesis of diamond-like carbon/nanosilica composite films by an electrochemica |
| Pulse co-electrodeposition of nano Al2O3 whiskers nickel composite coating |
| Gold/carbon composite tubes and nanowires by impregnating templates with hydroge |
| Friction and wear behaviour of Ni-based carbon nanotubes composite coatings |
| Sensing properties of the ZnO based composite oxide (Al,Sb)/ZnO to CH2H5OH gas |
| Study on the synthesis of spherulitic calcium carbonate composite in amphiphilic |
| The characterization and property of polystyrene compounding of α-Fe2O3 in |
| Preparation of polypropylene/carbon nanotube composite powder with a solid-state |
| Preparation and characterization of ruthenium-doped polypyrrole composites for s |
| Carbon nanotubes reinforced nickel-phosphorus base composite coating |
| Development of creep-resistant, nanosized Ag particle-reinforced Sn-Pb composite |
| Microstructure and Li alloy formation of nano-structured amorphous Si and Si/TiN |
| The tribological behavior of electroless Ni-P-SiC (nanometer particles) composit |
| Design of new mesostructured material: vanadate-poly(ethylene glycol) composite |
| Numerical approach for optically limited pulse transmission in polymer-phthalocy |
| Nanostructured Cu-Al2O3 composite produced by thermochemical process for electro |
| Deformation-induced nanocrystallization and its influence on work hardening in a |
| High strength and ductile binary Ti-Fe composite alloy |
| Effects of nano-carbon webs on the electrochemical properties in LiFePO4/C compo |
| Bonelike apatite coating on skeleton of poly(lactic acid) composite sponge |
| Investigation of layered structures of synthetic smectite/polypyrrole composite |
| Synthesis and performance of magnetic composite comprising barium ferrite and bi |
| Nano-particles dispersion effect on Ni/Al2O3 composite coatings |
| Tribological behavior of W2C nano-particle reinforced Si3N4 matrix composite |
| Direct formation and photocatalytic performance of anatase (TiO2)/silica (SiO2) |
| Preparation and performance testing of sulfonated poly(phenylene oxide) based co |
| Fabrication and characteristics of hole transporting materials-transition metal |
| High proton-conducting Nafion/calcium hydroxyphosphate (CHP) composite membranes |
| Development of self-lubricating titania/diamond nanoparticle composite |
| Polyaniline-MnO2 composite electrode for high energy density electrochemical cap |
| Mullite-boron nitride composite with high strength and low elasticity |
| Analysis of interfacial strengthening from composite hardness of TiN/VN and TiN/ |
| Biomimetic synthesis of bone-like nanocomposites using the self-organization mec |
| Electrochemical properties of nanostructured amorphous, sol-gel-synthesized TiO2 |
| Optical response of silver coating on CdS colloids |
| Special features of the microstructure of a composite with an increased fracture |
| Cobalt-based superparamagnetic nanorings |
| High-performance nanotube-reinforced plastics: understanding the mechanism of st |
| Recent advances in ceramic-polymer composite electrets |
| 12-Phosphormolibdic acid doped polyaniline-V2O5 composite |
| Effect of the dimensional factor on sintering composites of the system W-Sc2O3 |
| Composite of polyaniline containing iron oxides |
| Synthesis and characterization of plasma spray formed carbon nanotube reinforced |
| Mechanical and electrical properties of solution-Processed polyaniline/multiwall |
| Size-dependent effective modulus of elastic composite materials: spherical nanoc |
| Molecular filters: pores within pores |
| Preparation of single-walled carbon nanotube reinforced magnesia films |
| A widely tunable refractive index in a nanolayered photonic material |
| A practical guide to transmission electron microscopy of aerogels |
| Gel spinning of PVA/SWNT composite fiber |
| Sn/C composite anodes for Li-ion batteries |
| Nanoscale battery materials based on the self-assembly of block copolymers |
| Nanotube buckling in aligned multi-wall carbon nanotube composites |
| Polyaniline/carbon nanotube composite Schottky contacts |
| Inhibition of lithium dendrites by fumed silica-based composite electrolytes |
| Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for |
| Synthesis and characterization of nanosized polypyrrole-plystyrene composite par |
| Effect of nanoclay on shrinkage control of low profile unsaturated polyester (UP |
| Nanoengineered electronic materials get real with directed self-assembly |
| SU8-silver photosensitive nanocomposite |
| Microfabrication of ceramic components by microstereolithography |
| On the tensile and shear strength of nano-reinforced composite interfaces |
| Orientation order in nanoparticles in composite films |
| A water-dispersible conducting nanocomposite from suspension polymerisation of t |
| Influence of TiO2 nanometric filler on the behaviour of a composite membrane for |
| One pot synthesis of nanoparticles of aqueous colloidal polyaniline and its Au-n |
| Innovative materials for fusion power plant structures: separating functions |
| Characterization of nanocrystalline Si-MCMB composite anode materials |
| Structure and properties of composite materials with polymer matrix reinforced N |
| Polymer nanocomposites for aerospace applications: fabrication |
| Optical properties of polymer-nanotube composites |
| Li+ conducting fuzzy poly(ethylene oxide)-SiO2 polymer composite electrolytes |
| Discrete film thickness in polyacrylamide-CdS nanocomposite ultrathin films |
| A novel electrically conductive and biodegradable composite made of polypyrrole |
| Preparation and characterization of a conducting nanocomposite of polyN-vinylcar |
| Electrochemical properties of nanosize Sn-coated graphite anodes in lithium-ion |
| A conducting nanocomposite via intercalative polymerisation of thiophene in mont |
| Study on carbon nanotubes/magnesium matrix composites by stir-casting |
| A simple route to platinum and Pt-based composite nanotubes |
| Template synthesis and characterization of WO3/TiO2 composite nanotubes |
| Research of preparation and properties of a Ga-P composite fluorescent material |
| Preparation and electro-optic properties of poled nanocrystals and polymer compo |
| Electrical properties of soluble carbon nanotube/polymer composite films |
| Preparation and optical constants of the nano-crystal and polymer composite Bi4T |
| Synthesis and properties of electroless Ni-P-Nanometer Diamond composite coating |
| Investigation on radar absorbing properties of carbon nanotube |
| Characteristic of stellite/WC composite coating prepared by electrothermal explo |
| Electrochemical hydrogen storage in hydride-carbon composite |
| Studies of Fe-dopedSiO2/TiO2 composite nanoparticles prepared by sol-gel-hydroth |
| Toughening mechanisms of a Ti-based nanostructured composite containing ductile |
| anganese oxide/MWNTs composite electrodes for supercapacitors |
| Preparation and tensile properties of MWNT/polypropylene composite fibers by mel |
| A novel way to prepare nano-hydroxyapatite/poly(D,L-lactide) composite |
| Poly(acrylic acid)-guided synthesis of helical polyaniline/CdS composite microwi |
| Corrosion behavior of carbon nanotubes-Ni composite coating |
| Effect of graphite content and granularity on mechanical and tribological proper |
| Enhanced mechanical properties and morphological characterizations of poly(vinyl |
| Chemical synthesis and magnetic properties of well-coupled FePt/Fe composite nan |
| Preparation and properties of composite mineral powders |
| Capacitance performance of MnO2/PbO2 as composite electrode materials |
| Size effect of Al particles on the oxidation of electrodeposited Ni-Al composite |
| Magnetic nanocomposite thin films of BaFe12O19 and TiO2 prepared by sol-gel meth |
| Preparation technology and properties of electrodeposited Ni/nano SiC composite |
| Preparation, microstructure and tribological properties of nano-Al2O3/Ni brush p |
| Tubular composite of doped polyaniline with multi-walled carbon nanotubes |
| Fabrication of carbon nanotubes/copper phthalocyanine composites with improved c |
| Photochemical synthesis of bimetallic Au-Ag nanoparticles with core-shell type s |
| Friction and wear properties of PTFE composites reinforced with nano particle Ka |
| Synthesis of carbon nanotube/polyaniline composite nanotube and its microwave pe |
| Crystallization behavior of nanometer-sized Al2O3 composite coatings prepared by |
| Coupling interaction in multiferroic BaTiO3-CoFe2O4 nanostructures |
| Laser-surface-alloyed carbon nanotubes reinforced hydroxyapatite composite coati |
| Preparation of nanocrystal W-Cu composite powders by chemical coprecipitation an |
| Preparation of ZrO2/Al2O3 composite nanopowder by liquid-phase precipitation met |
| In situ preparation of nano-silica/polymethylmethacrylate composite particles by |
| High temperature tribology behaviors of brush plated Ni-W-Co/SiC composite coati |
| Nonlinear optical properties of Au/PVP composite thin films |
| Preparation and characterization of poled nanocrystal and polymer composite PZT/ |
| Recrystallization behavior of Al2CVCu composite produced by internal oxidation |
| Characterization and nonlinear optical property of a multi-walled carbon nanotub |
| Study on the preparation and characterization of ultra-high molecular weight pol |
| Preparation and characterization of network composite film containing polyoxomet |
| Carbon nanotubes-iron oxides magnetic composites as adsorbent for removal of Pb |
| Structure and infrared emissivity of polyimide/mesoporous silica composite films |
| Fibrillar polyaniline/diatomite composite synthesized by one-step in situ polyme |
| The fabrication and corrosion behavior of electroless Ni-P-carbon nanotube compo |
| Tribological behavior of carbon nanotubes composite coatings at different fricti |
| Fabrication of the nanometer Al2O3/Cu composite by internal oxidation |
| Nanostructured modification of mineral particle surfaces in Ca(OH)2-H2O-CO2 syst |
| Processing and creep properties of Sn-Cu composite solders with small amounts of |
| Characterization of carbon nanofiber composites synthesized by shaping process |
| Reduced Li diffusion barriers in composite BC3 nanotubes |
| Effect of rare earth Y on preparation of nanometer W-Ni-Fe composite powder |
| Study on electrochemical property of carbon-sulfur nano-composite material as ca |
| Anatase TiO2 nanolayer coating on cobalt ferrite nanoparticles for magnetic phot |
| Characteristic of NiCr/WC-Co composite coating sprayed directionally by electrot |
| Three-dimensional micro- and nanometre composite aluminium patterns |
| Electrodeposited nickel-cobalt composite coating containing nano-sized Si3N4 |
| In situ gradient nano-scale fibril formation during polypropylene (PP)/polystyre |
| Fabrication and microstructures of Si composite nanocone arrays |
| Fabrication and characterization of Ni-ZrO2 composite nano-coatings by pulse ele |
| Synthesis, characterization and catalytic property of ceria spherical nanocrysta |
| Fabrication and electrical properties of Li3PO4-based composite electrolyte film |
| Solvothermal synthesis and characterization of CdS nanowires/PVA composite films |
| Synthesis and properties of silica/polystyrene/polyaniline conductive composite |
| Towards ultrathin polyaniline films for gas separation |
| Electrochemical fabrication and capacitance of composite films of carbon nanotub |
| Interfaces: nanometric dielectrics |
| A metal-polymer composite with unusual properties |
| Nanoscale defect structures at crystal-glass interfaces |
| Size-controlled hydroxyapatite nanoparticles as self-organized organic-inorganic |
| Rectifying nanohomo contacts of W-Ga-C composite pad and nanowire fabricated by |
| Nanostructured composite materials with improved deformation behavior |
| A soluble and highly functional polyaniline-carbon nanotube composite |
| Physical mechanism for the mechanical reinforcement in nanotube-polymer composit |
| Transport behaviour of Cl- in composite films of polypyrrole and CoFe2O4 obtaine |
| Effective separation and alignment of long entangled carbon nanotubes in epoxy |
| A composite coating by electrolysis-induced collagen self-assembly and calcium p |
| Immobilization of a layer of carbon nanofibres (CNFs) on Ni foam: a new structur |
| Preparation and characterization of a conjugated polymer and copper nanoparticle |
| Extended Brewer hypo-hyper-d-interionic bonding theory II. Strong metal-support |
| A new approach to the synthesis of nanocrystal conjugated polymer composites |
| Reactive oxide-dispersed Ni3Al intermetallic coatings by sediment co-deposition |
| Electrically conductive composite powders and compounds produced with solid stat |
| Nanocomposites TiB2-Cu: consolidation and erosion behavior |
| Singlewall carbon nanotubes covered with polypyrrole nanoparticles by the miniem |
| Fabrication and dielectric properties of barium strontium titanate nano-particle |
| Formation of polyaniline nanorod/liquid crystalline epoxy composite nanowires us |
| Adhesive strength of the apatite layer formed on TiO2 nanoparticles/high density |
| Fabrication of nano-laminar composite from glass flake |
| Ultrafast electron dynamics and enhanced optical nonlinearities of CdS-capped Au |
| Fabrication of carbon nanofiber/Cu composite powder by electroless plating and m |
| Thermal behavior of SnO2-5 wt % Pd composite nanoparticles fabricated by in-situ |
| Mechanical and thermal properties of vapor-grown carbon nanofiber and polycarbon |
| Enhanced plasticity in a bulk amorphous matrix composite: macroscopic and micros |
| A three-layered nano-carbonated hydroxyapatite/collagen/PLGA composite membrane |
| Characterization of electronically conducting polypyrrole based composite materi |
| Multi-scale mechanics of nanocomposites including interface: Experimental and nu |
| Systematic approach to design higher temperature composite PEMs |
| Low-loss percolative dielectric composite |
| Fractional vortices and composite domain walls in flat nanomagnets |
| Structural and biological properties of carbon nanotube composite films |
| Characterization of a novel bioactive composite using advanced X-ray computed to |
| Gold nanoparticle mediated formation of aligned nanotube composite films |
| Microstructure and tensile properties of bulk nanostructured Al-5083/SiCp compos |
| Managing heat for electronics |
| Mechanical characterization of carbon nanotube composite materials |
| Development and characterization of single wall carbon nanotube-Nafion composite |
| Magnetic properties of template-synthesized cobalt/polymer composite nanotubes |
| Selective removal of composite sealants with near-ultraviolet laser pulses of na |
| Analysis of interface granularity in discontinuous fiber composites |
| Nanocoatings for engine application |
| An amphiphilic poly(phenylene ethynylene) as the structure-directing agent for p |
| Polymer-nanotube composites for transparent, conducting thin films |
| Characterizing energy dissipation in single-walled carbon nanotube polycarbonate |
| The anti-microbial activity of titania-nickel ferrite composite nanoparticles |
| A tri-modal aluminum based composite with super-high strength |
| MULTIPHASIC NANOSTRUCTURED COMPOSITES FOR PHOTONICS - FULLERENE-DOPED MONOLITH G |
| REMANENCE ENHANCEMENT IN COMPOSITE MAGNETS OF MICROMETER SM-FE-N GRAINS AND NANO |
| IR TRANSMISSION SPECTRA OF NANOCRYSTALLINE POWDER MATERIALS OF THE COMPOSITE OXI |
| A COVALENT MICRO NANOCOMPOSITE RESISTANT TO HIGH-TEMPERATURE OXIDATION |
| Superparamagnetic nanocomposite polyaniline/magnetite |
| Charge compensation dynamics in the redox processes of polypyrrole-modified elec |
| In-situ formed AlN particulates and TiN whiskers mixture reinforced Al composite |
| Biosilicates and biomimetic silicate synthesis |
| Nanostructured semiconductor films for photocatalysis. Photoelectrochemical beha |
| Nanoparticle-copolymer composites: Curvature |
| Optical and structural properties of nanocrystalline ZnS-SiO2 composite films |
| Preparation of nanoparticulate [PMo11Cu(H2O)O-39](5-)-n-C18H37NH2 film using Lan |
| PROCESSING OF NANO-Y-TZP/AL2O3 COMPOSITES .2. COMPACTION AND SINTERING BEHAVIOR |
| PROCESSING OF NANO-Y-TZP/AL2O3 COMPOSITES .1. PREPARATION AND CHARACTERIZATION O |
| IR TRANSMISSION SPECTRA OF NANOCRYSTALLINE POWDER MATERIALS OF THE COMPOSITE OXI |