| Cr-N镀层的组织结构及性能研究/Study on Structure and Properties for Cr-N Coatings |
| 全反式维甲酸、联合化疗及白血康序贯治疗急性早幼粒细胞性白血病的疗效观察/Effects of Sequential Therapy with All-trans |
| 正常人脑氢质子磁共振波谱测定及临床应用研究/Determination of Proton Magnetic Resonance Spectroscopy in |
| 铝合金激光熔覆处理中的非晶组织 |
| 等离子喷涂镍铬合金涂层结构及性能研 |
| 离子轰击对Cr-N基薄膜组织结构和性能影响研究/Study on the Effects of Ion Bombardment on Microstructur |
| 铝合金激光熔覆层中的非晶组织及其对摩擦学性能的影响/No |
| 认知无线电实验系统中USB2.0接口的设计与实现/Design and Implementation of USB2.0 Interface In Cognit |
| 认知无线电实验系统硬件平台的设计及实现/Design and Implementation of Hardware Platform for Cognitive |
| 真空电弧熔炼CuCr25合金的研究/The Investigation of CuCr25 Alloys Prepared by Vacuum Arc-smel |
| CR公司电源测试设备营销策略研究/Marketing Strategy Research of Power Testing Equipment Made by |
| Cu基合金的机械合金化研究/Cu-base alloy by Mechanical Alloying |
| 等通道转角挤压铜及铜合金的微观组织与疲劳行为/The Microstructure and Fatigue Behavior of Equal Channel |
| 认知无线电实验系统基带模块的设计与实现及降低峰均比技术的研究/Design and Implementation of baseband module of C |
| 认知无线电实验系统中模拟通道的设计实现与信道估计算法研究/Design, Implementation of Analog Channel for Cognit |
| 12%Cr转子钢高温疲劳性能研究/Study on the Fatigue Behavior of 12%Cr Steam Turbine Rotor Stee |
| OFDM认知无线电实验系统中的同步技术实现研究/Research on the Synchronization Techniques in OFDM-based |
| 认知无线电实验系统及其基带模块和接收前端模块的设计/Design of CR Experiment System and Implementation of B |
| 高强高导Cu-Cr合金的腐蚀/Corrosion of High-strength High-electrical Conductivity |
| 熔体快淬Cu-Cr-Ti合金的微观组织分析及电性能研究/Microstructures Analysis of Melt-spun Cu-Cr-Ti Ribbo |
| 熔体快淬和合金化对CuCr合金微观组织及其触头电性能的影响/The Effects of Melt-spinning and Aollying on the M |
| 铸造铬青铜熔炼工艺及性能研究/Study on process and properties of cast chromium-bronze |
| 铜合金的时效和再结晶行为的经验电子理论解释/Application of empirical electron theory to aging, and rec |
| 首发重性抑郁症患者脑质子磁共振波谱分析与认知功能研究/Proton magnetic resonance spectroscopy and cognitive |
| MRI和1H MRS在足月新生儿缺氧缺血性脑病早期诊断和预后判断中的价值/The value of MRI and 1H MRS for early diagn |
| 氢质子磁共振波谱在颅脑疾病中的临床应用研究/The Clinical Application Study of Proton Magnetic Resonanc |
| 离子束增强沉积Cr-N镀层组织性能以及结合强度/No |
| 快速凝固高强度高导电铜合金的制备技术及组织和性能的研究/No |
| 合金化对熔体快淬Cu-Cr合金微观组织及电阻率影响的研究/Research on The Effect of Alloying on The Microstru |
| 等离子喷涂和激光重熔涂层对铜汇流排性能的影响/Effect of Plasma Spraying and Laser Remelting on Copper B |
| 含沙水域过流部件材料冲蚀磨损机理及新材料研制/Erosion-wear Mechanism Study for Components Used in Slurr |
| 阻燃钛合金热稳定性研究/study on thermal stability of Ti-V-Cr burn-resistant alloys |
| 恒温超塑性固相焊接工艺理论研究/Study on Technology of Isothermal Superplastic Solid-State Weldi |
| 我国劣势上市公司的资产重组研究——某上市公司资产重组方案实证研究/Study of the Capital Reconstructing of the Depr |
| Cu-Cr合金膜的制备及其性能研究/Study of the properties and preparation of Cu-Cr films |
| 真空感应熔炼CuCr25合金的研究/Investigation of CuCr25 Alloys Prepared by Vacuum Induction Me |
| 冷却方法、合金元素对CuCr25触头材料组织与性能的影响/The Influence of Solidifying Methods and Alloy Elem |
| GMPLS信令协议和保护恢复技术的研究与实现/Study & Implementation of GMPLS Signaling and P&R |
| 小儿肾实质感染危险因素分析及影像学检查策略探讨/Studies on risk factors of renal parenchymal infection a |
| 二氧化碳气氛下乙苯催化脱氢研究/dehydrogenation of ethylbenzene to styrene in the presence of ca |
| Cr超薄膜在W衬底上结构与磁性的第一性原理研究/First-principles study of structural and magnetic proper |
| CAG方案治疗难治性急性髓系白血病临床及同步化机制探讨/Study of clinical use and mechanism of CAG regimen |
| 肺癌脑转移瘤的MRI诊断和鉴别诊断/MRI Diagnosis and Differential Diagnosis of Brain Metastases f |
| 3.0T磁共振波谱在脑肿瘤诊断中的应用研究/3.0T MR Spectroscopy imaging in the evaluation of |
| MRSI在脑星形细胞肿瘤及其放疗中的应用:动物实验与临床研究/Applications of MR Spectroscopic Imaging before a |
| 弥漫性大B细胞淋巴瘤临床病理及血浆细胞因子水平相关性研究/The correlation between clinicopathologic feature a |
| 铁磁性半金属CrO2表面几何结构和电子态的第一性原理研究/The geometric and electronic structure of ferromagn |
| 磁共振波谱成像及磁共振弥散张量成像在外伤性脑损伤的应用研究/Applications of MR Spectroscopic Imaging and Diffu |
| 氢质子磁共振波谱分析和磁共振弥散加权成像在复杂部分发作癫痫的应用研究/1H Magnetic resonance spectroscopy and diffus |
| 杭州湾潮滩表层沉积物中重金属和磷的分布、形态及其环境意义/Distribution, Forms and Environmental Significance |
| 广东省水稻品种品质现状分析及改良策略/Analysis of Grain Quality of Current Rice Varieties in Guangd |
| 两种耕地土壤的Cr、Ni污染的微生物效应的研究/Study on Microbial Indexes in Paddy soil and Red Soil Po |
| 粘结层成分与热障涂层界面电子结构的关系/The relationship between the composition of the bonding laye |
| 乙烯三聚催化剂配位方式与性能关系的研究/STUDY ON CATALYST SYSTEM FOR THE SELECTIVE TRIMERIZATION OF |
| 氯化橡胶生产中四氯化碳的溶剂替代研究/Study on non-ODS substitute solvent for chlorinated rubber pr |
| W-Mo-Ni-Cr/Al2O3新型加氢脱氮催化剂及其改性研究/NEW TYPE OF HDN CATALYST W-Mo-Ni-Cr/Al2O3 AND MO |
| 类水滑石层板中常用金属离子配合物/THEORETICAL STUDY of ELECTRONIC STRUCTURES of SEVERAL REPRESENT |
| 乳状液膜系统稳定性的显微分析及对含Cr(Ⅵ)离子工业废水分离效率的研究/MICROSCOPIC STUDY ON STABILITY OF EMULSION L |
| 丙烷CO2氧化脱氢制丙烯催化剂的制备及性能研究/STUDY ON CATALYSTS FOR PROPANE OXIDATIVE DEHYDROGENATION |
| 碳钢在二氧化碳溶液中的腐蚀规律及防护措施研究/Corrosion Behaviors and countermeasure of mild Steel in C |
| 蒙脱石无机层间化合物的制备及其对废水中Cr(VI)的吸附行为与机理研究/Preparation of inorganic-compound-intercalat |
| 活性啤酒酵母吸附Cr(VI)的研究及机理探讨/ |
| 生物矿化针铁矿处理含铬废水及其机理研究/ |
| 高速钢W6Mo_5Cr_4V_2冷轧芯辊断裂分析与疲劳寿命研究/Fracture analysis and research on fatigue lLife |
| WC-10Co硬质合金低压烧结工艺的探索/Study of WC-10Co cemented carbide in low pressure sintering |
| 生物矿化纳米FeOOH的特征与自组装合成及其环境意义/Characterization and self-assembly synthesis of biomi |
| 共沉淀合成钇铝陶瓷色料及稀土矿分解流程研究/Researches on preparation of Y-Al based ceramic pigments b |
| 高性能轧辊用高铬钢的热处理工艺优化及组织性能研究/Study on the optimization of heat treatment and microst |
| 粘结层成分与热障涂层界面电子结构的关系/The relationship between the composition of the bonding laye |
| 乙烯三聚催化剂配位方式与性能关系的研究/STUDY ON CATALYST SYSTEM FOR THE SELECTIVE TRIMERIZATION OF |
| 氯化橡胶生产中四氯化碳的溶剂替代研究/Study on non-ODS substitute solvent for chlorinated rubber pr |
| W-Mo-Ni-Cr/Al2O3新型加氢脱氮催化剂及其改性研究/NEW TYPE OF HDN CATALYST W-Mo-Ni-Cr/Al2O3 AND MO |
| 类水滑石层板中常用金属离子配合物/THEORETICAL STUDY of ELECTRONIC STRUCTURES of SEVERAL REPRESENT |
| 乳状液膜系统稳定性的显微分析及对含Cr(Ⅵ)离子工业废水分离效率的研究/MICROSCOPIC STUDY ON STABILITY OF EMULSION L |
| 丙烷CO2氧化脱氢制丙烯催化剂的制备及性能研究/STUDY ON CATALYSTS FOR PROPANE OXIDATIVE DEHYDROGENATION |
| 碳钢在二氧化碳溶液中的腐蚀规律及防护措施研究/Corrosion Behaviors and countermeasure of mild Steel in C |
| Cr2O3及其复合材料的烧结、显微结构和性能研究 |
| Cu-15wt％Cr粉末形变复合工艺及组织性能研究 |
| 铬的原子化动力学与环境铬的生态行为研究 |
| Cr膜Nd-YAG激光表面氧化机理 |
| Cr膜Nd-YAG激光表面氧化机理 |
| 部分水解聚丙烯酰胺/Cr(Ⅲ)凝胶的交联机理及交联动力学研究 |
| 先兆性铁电晶体和可调谐激光晶体中过渡金属离子光谱的压力与温度效应的理论研究 |
| 先兆性铁电晶体和可调谐激光晶体中过渡金属离子光谱的压力与温度效应的理论研究 |
| 先兆性铁电晶体和可调谐激光晶体中过渡金属离子光谱的压力与温度效应的理论研究 |
| NiAl及其合金的超塑性及高温力学行为的研究 |
| NiAl及其合金的超塑性及高温力学行为的研究 |
| 钴酸镧型复合氧化物的制备及其表面界面化学结构研究 |
| 脑转移瘤伽玛刀疗效的功能性MRI评估 |
| 脑转移瘤伽玛刀疗效的功能性MRI评估 |
| SBA-15介孔分子筛作为固体酸、加氢和氧化脱氢催化剂载体的探索 |
| 45钢和40Cr钢疲劳损伤恢复机理及技术研究 |
| 燃煤电站锅炉用新型Fe/Cr涂层耐高温腐蚀性能和机理的研究/Study on High Temperature Corrosion Resistance and |
| 新型Fe/Cr-Si柱撑蒙脱石的制备、表征及应用研究/STUDIES ON PREPARATION, CHARACTERIZATION AND APPLICAT |
| pH影响铁酸镍前驱体吸附Cr(VI)研究/The study of pH effect on Cr(VI) adsorption by NiFe2O4 prec |
| pH影响铁酸镍前驱体吸附Cr(VI)研究/ |
| 铁酸镍前驱体去除与回收Cr(VI)研究/The removal and recovery study of Cr(VI) by NiFe2O4 precurso |
| pH和离子强度影响铁酸镍前驱体吸附Cr(VI)研究/The study of pH and ionic strength effect on Cr(VI) ad |
| 生物絮凝剂对水中六价铬的去除/Removal of Cr( Ⅵ ) by bioflocculant |
| 微波法制备树皮含碳吸附剂及去除水中六价铬的研究/Study on Microwave Modified Barks and Containing Carbon |
| 松花江吉林省段表层沉积物中重金属污染研究/Research on Heavy Metal Pollution in the Surficial Sediment |
| 微生物吸附水中重金属离子性能研究/ |
| 新型铸造高Cr热作模具钢热疲劳性能的研究/ |
| 纳米级Cr薄层对PtMn/NiFe钉扎薄膜显微结构影响的电镜观察/ |
| 便携式比色计的研制及其应用/ |
| 新型铸造高Cr热作模具钢的焊补/ |
| 急性淋巴细胞白血病改良VDCP与VDCP化疗方案的比较/ |
| 急性非淋巴细胞白血病三种化疗方案(DA、HA、IA）的比较/ |
| 三种不同合金在人工唾液中耐腐蚀性能的研究/ |
| 急性白血病诱导缓解疗效相关因素的临床分析/ |
| 乙烷二氧化碳脱氢制乙烯 / |
| 去甲氧柔红霉素的抗白血病疗效分析/ |
| 激光淬火铁基粉末冶金材料摩擦磨损性能的研究/ |
| 幔源Si-O系统铬和镍的矿床学研究/ |
| 镉性肾损伤的判定、检测技术及分子机制研究/ |
| 质子磁共振波谱在脑内环状强化病变鉴别诊断的临床应用/ |
| 急性白血病骨髓象完全缓解时骨髓活检中原始细胞灶的意义分析/ |
| 烤瓷熔附Ni-Cr合金修复体界面行为的研究/ |
| APFIM study of the compositional inhomogeneity of sputtered Co-Cr magnetic thin |
| Synthesis of nanostructured Ni/Cr and Ni-Cr3C2 powders by an organic solution re |
| Dependence of outgassing rate on surface oxide layer thickness in type 304 stain |
| Structure and properties of the mechanically alloyed Cu-5Cr alloy |
| Magnetic properties and magnetization reversal of CoSm||Cr thin films |
| Effect of Fe layer thickness on the magnetic moment in Fe/Cr multilayers prepare |
| Amorphization of Al-12at.%Ti-X(X=Cr,Fe,Ni,Cu) mixed powders by mechanical alloyi |
| Synthesis and characterization of chains composed of nanometer size Fe-Cr-B part |
| Magnetic properties of Cr-added Nd-Fe-B nanocrystalline composite magnets |
| Fe-Cr-Hf-N and Fe-Cr-Ta-N soft magnetic thin films |
| Electron-beam-induced oxidation for single-electron devices |
| Surface properties of mechanosynthesized Al2O3-Cr nanocomposite powders |
| Thermal properties of ball-milled nanocrystalline Fe, Co and Cr powders |
| Precipitation of nanogranular Ge particles in rapidly solidified Al-Si-Fe-Cr-Ge |
| Effect of heat treatment on the electrode characteristics of the ball-milled Zr- |
| Microstructure control of Fe-25mass%Cr-(1.5-1.8)mass%C alloys by mechanical allo |
| Development of graded Cr-Ti-N coatings |
| Characterization of mechanically alloyed Fe-Cr-Sn alloys |
| Cr underlayer lattice modulation through alloying and multi-layer construction |
| Effect of nanocrystallization on the oxidation resistance of Ni-5Cr-5Al alloy |
| High-pressure ultrasonic study of monocrystalline Cr in the antiferromagnetic an |
| Ultrafast dynamics of transition metal carbonyls. 3. Intracluster chemistry in [ |
| Determination of chromium (VI) by flow-injection spectrophotometry coupled with |
| New catalytic polarographic system of O-Phen-NaNO2-CTMAB for determination of Cr |
| Effect of microstructure change on oxide formation of sputtered Ni-3Cr-10Al nano |
| Microstructure and mechanical behavior of arc-evaporated Cr-N coatings |
| Electrochemical Studies of Metal-Doped Diamondlike Carbon Films |
| Z-contrast imaging and electron energy-loss spectroscopy analysis of chromium-do |
| Study on Co-Cr alloy cluster assembling process by magneto-optical Kerr effect |
| Effect of γ prime precipitation on oxide formation on the Ni-3Cr-20Al and |
| Mechanism of oxidation of sputtered Ni-Cr-Al nanocrystalline coatings |
| Molecular-beam epitaxial growth of short-period (001) Al/Ag/Cr superlattices wit |
| Annealing effects on the structure and mechanical properties of r.f.-sputtered C |
| Effect of nanocrystallization on the oxide formation on Ni-8Cr-3.5Al alloy |
| Remediation of Cr(VI) and Pb(II) aqueous solutions using supported, nanoscale ze |
| Effects of nanoscale heterogeneity on the corrosion behavior of non-equilibrium |
| Low temperature TEM study of electronic phase separation in Cr-doped Nd0.5Ca0.5M |
| Effects of O2 gas on the size and structure of Cr clusters formed by plasma-gas- |
| Cubic titanium trialuminide thermal spray coatings - A review |
| Hydroxylation of ultra-thin films of α-Cr2O3(0 0 0 1) formed on Cr(1 1 0) |
| The influence of Cr addition on the corrosion resistance of environments |
| On-line high-precision stable hydrogen isotopic analyses on nanoliter water samp |
| Simultaneous ultratrace determination of Zr and Nb in chromium matrixes with ICP |
| Fabrication of CrSi2 thermoelectric material using mechanical alloying |
| Characterization of rust layer on low alloy steel exposed in marine atmosphere. |
| Processing and mechanical properties of Al2O3-5 vol.% Cr nanocomposites |
| On the importance of intermediate internal charge repulsion for the synthesis of |
| Mechanical strengthening in nanometric CrN/Cr multilayers measured by nanoindent |
| Oxidation state and localization of chromium ions in Cr-doped cassiterite and Cr |
| Influence of Cr substitution in the magnetoimpedance response of FeSiBCuNb wires |
| The role of cementite in the metal dusting of Fe-Cr and Fe-Ni-Cr Alloys |
| The sol-gel route in synthesis of Cr(III)-containing clays. Comparison between M |
| Effect of hydrogen treatment on the performance of Cr-ZSM-5 in deep oxidative de |
| Age Hardening of Ultrafine Grained Al-Ti-Cr Alloys Fabricated by Continuous Elec |
| The role of aluminum in the crystallization of Cr-Si-Ni resistive films |
| Speciation of Cr(III) and Cr(VI) by nanometer titanium dioxide micro-column and |
| Effect of grain size on the oxidation behavior of Cu-20Ni-20Cr alloy |
| Micro-crystalline coatings of Co-Cr dispersed with Y2O3 deposited by series elec |
| Sol-gel synthesis of LaMO3 (M = Cr, Mn, Fe, Co, Ni) nanocrystalline powders |
| Effect of Cr on mean grain size and magnetic properties of two-phase nanocrystal |
| Nano-mesoscopic structural control in 9Cr-ODS ferritic/martensitic steels |
| Characterization of extreme ultraviolet masks by extreme ultraviolet scatteromet |
| Formation of density controlled Cr-filled carbon nanotubes on Au-Cr solid soluti |
| Spatial distribution and stabilization of electrons ejected by two-photon ioniza |
| Coordination and haptotropic rearrangement of Cr(CO)3 on (n,0) nanotube sidewall |
| Structure and mechanical properties of ball milled TiAI-Cr intermetallics consol |
| Removal of Cr(VI) by magnetite nanoparticle |
| Period dependence of hardness and microstructure on nanometric Cr/CrN multilayer |
| Ultrafiltration and nanofiltration in the pulp and paper industry using cross-ro |
| Ordering reaction and sintering behavior in [FePt]100-xCrx nanoparticles |
| The chemical evolution of gamma prime precipitates in Ni-Al-Cr base alloys on a |
| Deformation behavior and mechanisms of an extruded nanocrystalline Al-Fe-Cr-Ti a |
| Preparation and primary investigation of the tribological properties of ion-plat |
| Characterization of (V1-xCrx)2O3 nano-powder |
| Cr and Cr-Mo coatings on titanium alloy surface prepared by ion-beam enhanced de |
| Removal of hexavalent chromium from aqueous solution by iron nanoparticles |
| Strongly luminescent Cr-doped alumina nanofibres |
| A novel electrodeposited Ni-Cr nanocomposite with increased resistance to pittin |
| Structural and compositional changes during mechanical milling of the Fe-Cr syst |
| Coupled-diffusion transport of Cr(VI) across anion-exchange membranes prepared b |
| Growth and magnetism of Fe on Cr(001): A spin-polarized scanning tunneling spect |
| Spiral terraces and spin frustration in layered antiferromagnetic Cr (001) films |
| Mechanical and tribological properties of Cr-N and Cr-SI-N coatings reactively s |
| Ab initio study of the stability of X (X=Cr, Nb, Ag) ultra-thin layers on Cu(001 |
| Chromium-based coatings by atmospheric chemical vapor deposition at low temperat |
| Wear mechanisms of steel roller bearings protected by thin, hard and low frictio |
| Phase transformations of mechanically alloyed Fe-Cr-P-C powders |
| Structural and electrical properties of nitrogen-doped Cr-C:H films synthesized |
| Microstructural characterisation of Fe-Cr-P-C powder mixture prepared by ball mi |
| Two-photon absorption in YAB:Cr3+ nanocrystallites |
| Microstructure and nanohardness properties of Zr-Al-N and Zr-Cr-N thin films |
| Formation of nanostructured Re-Cr-Ni diffusion barrier coatings on Nb superalloy |
| Removal and recovery of Cr(VI) from wastewater by maghemite nanoparticles |
| Influence of nanoscale topography on the hydrophobicity of fluoro-based polymer |
| Stress and mechanical properties of Ti-Cr-N gradient coatings deposited by vacuu |
| Oxidative dissolution of chromium(III) hydroxide at pH 9, 3, and 2 with product |
| Nano Cr interlayered CrN coatings on steels |
| Mechanical and tribological behavior of nanocomposite multilayered Cr/a-C thin f |
| Angle resolved XPS for characterizing thin oxide films formed on the surface of |
| Characterization of KNbO3 crystal for frequency doubling of a tunable pulsed nea |
| Characteristics of Cr:LiSAF laser end-pumped with a ruby laser |
| Formation of fine nanocrystalline microstructure in bulk Fe-28Al-2Cr |
| Nanocrystalline high coercivity PrCo//Cr thin films: potential high density magn |
| The effect of Fe layer thickness on the magnetic moment in Fe/Cr multilayers pre |
| Structural and mechanical characterization of Cr-Ta-N hard coatings prepared by |
| Amplification by optical composites |
| Fabrication of Cr nanostructures with the scanning tunnelling microscope |
| Preparation, oxidation and magnetic properties of Fe-Cr ultrafine powders by hyd |
| PbS quantum-dot doped glasses as saturable absorbers for mode locking of a Cr:fo |
| Magnetic properties of Nd-Fe-B-Cr nanocrystalline composite magnets |
| Magnetically induced decomposition in Co-Cr thin-film and bulk alloys |
| Chromium effect on some properties of melt-spun amorphous and nanostructured all |
| Microstructural development of nanocrystalline Fe-Cr-B alloy during the thermal |
| Alumina-chromium cermets by hot-pressing of nanocomposite powders |
| Improvement of soft magnetic properties of Co-Cr-O film by additional X(=Rh, Ir, |
| The effect of heat treatment on the electrode characteristics of the ball-milled |
| Experimental evidence for the critical size of heterogeneity areas for pitting c |
| Transient Ne-like Cr X-ray lasers driven by picosecond laser pulses |
| Electrochemical and XPS studies on the passivation behavior of sputter-deposited |
| Crystallization sequences and magnetic properties of melt-spun Nd2Fe14B-based na |
| Magnetic hardening mechanism in nanocrystalline Nd2Fe14B with 0.1 at.% addition |
| Alumina-alloy nanocomposite powders by mechanosynthesis |
| Composition dependence of microstructure of mechanically alloyed powders and the |
| Effect of nanocrystallization on the oxide formation of Ni-5Cr-5Al alloy |
| The effect of heat treatment on the corrosion behavior of sputter-deposited alum |
| Electrical resistivity of sputtered Cu/Cr multilayered thin films |
| Monodispersed Cr cluster formation by plasma-gas-condensation |
| Fabrication and thermal stability of a nanocrystalline Ni-Al-Cr alloy: compariso |
| The effect of nanocrystallization on the oxidation resistance of Ni-5Cr-5Al allo |
| Oxidation kinetics of sputtered Ni-5Cr-5Al nanocrystalline coating at 900°C |
| Z-contrast imaging and electron energy-loss spectroscopy analysis of chromium-do |
| Spatial self-organization of a nanoscale structure on the Pt(111) surface |
| Reply to “Comment on `Grain-boundary structure and magnetic behavior in na |
| Correlation of short-period oscillatory exchange coupling to nanometer-scale lat |
| Microstructural evolution of Fe-Cr-W model alloys during Fe+ ion irradiation |
| The effect of nanocrystallization on the oxide formation on Ni-8Cr-3.5Al alloy |
| Low-temperature growth of carbon nanotubes by thermal chemical vapor deposition |
| Crystallography and morphology of nanosized Cr particles in a Cu-0.2% Cr alloy |
| Predicting the oxide formation of Ni-Cr-Al alloys with nano-sized grain |
| Mixing of iron with various metals by high-energy ball milling of elemental powd |
| ω-phase formation in a rapidly solidified Cr-40 at.% Al alloy |
| Microstructural and magnetic properties of Fe/Cr-substituted ferrite composites |
| The effect nanocrystallization on the oxide formation on Ni-11Cr-8Al alloy |
| Effect of nanocrystallization on the oxidation behavior of a Ni-8Cr-3.5 Al alloy |
| Magnetic properties and stability of Cr and Co added Fe3B/Nd2Fe14B based exchang |
| Effects of nanocrystalline heterogeneity on the corrosion behavior of sputter-de |
| Effect of γ precipitation on oxide formation on the Ni-3Cr-20Al and Ni-10C |
| Investigation on mechanical alloying of NiAl(Cr) |
| Nanometer-scale, fully net lamella microstructure in the laser resolidified Ti-4 |
| Effect of microstructural variation on the TiO2 formation on sputtered Ni-Cr-Al- |
| Comparison of NiCr-O and Cr-Si thin film resistors with mid-range of electric re |
| High temperature tensile properties of mechanically alloyed Al-Cr-Zr alloys |
| Oxidation behavior of sputtered Ni-Cr-Al-Ti nanocrystalline coating |
| High-temperature oxidation of two-phase nanocrystalline Ag-Cr alloys in 1 atm O2 |
| Random-field Ising-type transition of pure and doped SBN from the relaxor into t |
| Oxidation of nanocrystallized Cu-Cr films under different oxygen pressures |
| Electronic effects in scanning tunneling microscopy of dendritic, Cr-filled carb |
| Corrosion behaviour of amorphous Ni-Cr-Nb-P-B bulk alloys in 6M HCl solution |
| Overlayer-induced anisotropic alignment of Nd2Fe14B nanograins |
| Kondo response of a single antiferromagnetic chromium trimer |
| Preparation of nanocrystalline high-nitrogen stainless steel powders by mechanic |
| Fine pattern replication by EUV lithography |
| Fine spherical particles of narrow size distribution in the Cr2O3-Al2O3 system |
| Nano-crystallization and surface analysis of electrolytic ZrO2 coatings on Co-Cr |
| A simple route to metal nanodots and nanoporous metal films |
| Atom probe tomography investigation of the microstructure of superalloys N18 |
| Synthesis, characterization and emission properties of single-wall nanotubes pro |
| Structure and Mössbauer spectra for the Fe-Cr system: From bulk alloy to na |
| Structural characterisation and mechanical properties of nanocomposite Al-based |
| Local magnetostrictive response of small magnetic entities in artificial Fe-Cr c |
| Investigation of Cr structural positions in spinel with the use of X-ray emissio |
| Growth and dielectric behavior of radio frequency magnetron-sputtered lead magne |
| The growth and conductivity of transition metal nanolayers on silicon |
| Characterization of rust layer formed on low alloy steel exposed in marine atmos |
| Bulk glassy Pd-Cu-Ni-Cr-P alloys containing dispersed nanoparticles prepared by |
| X-ray investigation of metastable crystalline phases in co-deposited Fe-Cr alloy |
| Oxide formation on two-phase Ni-3Cr-20Al and Ni-10Cr-11Al-8Ti microcrystalline c |
| Structures of submonatomic Sn layers in Fe/Cr(Sn)Cr magnetic multilayers determi |
| Fabrication of thermal microprobes with a sub-100 nm metal-to-metal junction |
| Structures, properties and responses to heat treatment of deformation processed |
| Synthesis of nanocrystalline chromium nitride from ammonolysis of chromium chlor |
| Effect of nitrogen on crystallization behavior and electrical properties of Cr-S |
| Microgravimetric corrosion study of magnetron-sputtered Co-Cr-Mo and Ni-Cr-Mo al |
| Effect of alloying yttrium on corrosion erosion behavior of 27Cr cast white iron |
| Fabrication of Si-based nanoimprint stamps with sub-20 nm features |
| Magnetic properties of Fe1/CrN nanoinclusions in Fe |
| Occupancy of the 3d electron shell of Co and Cr in nanosized CoCrPt magnetic thi |
| Potential of thin films of Cr-Si-C type deposited by MOCVD as diffusion barriers |
| Perpendicular giant magnetoresistance in Fe/Cr nanowires |
| Observation of oxidation and mechanical strain in Cr nanoparticles produced by b |
| Atoms on demand: fast, deterministic production of single Cr atoms |
| Finite-size effects in the conductance and giant magnetoresistance of Fe/Cr and |
| Fluctuating spin density waves revealed by perturbed angular correlation spectro |
| Magnetoresistive behavior of Cr-doped manganites Pr0.44Sr0.56MnO3 |
| Effects of Cr and SiN contents on the microstructure and magnetic grain interact |
| Oxidation state localization of chromium ions in Cr-doped cassiterite and Cr-dop |
| Field emission properties of vertically aligned carbon nanotubes grown on bias-e |
| Effect of metal vapor vacuum arc Cr-implanted interlayers on the microstructure |
| Study of chromium states in silica glass implanted with Cr+ ions to high fluence |
| CoCr binary nanocluster wires: enhanced magnetic properties of the Co-rich phase |
| Rapid synthesis of Al2O3 reinforced Fe-Cr-Ni composites |
| Anisotropic growth of Cr Ad-layer: a one-dimensional nanostructure |
| Control and investigation of the spin structures of thin Cr films |
| Synthesis of nanocrystalline CrN from Cr[OC(NH2)2]6Cl3 coordination compound |
| Grain size effects on the oxidation of two ternary Cu-Ni-20wt.% Cr alloys at 700 |
| Controlled growth of carbon nanotubes on micropatterned Au/Cr composite film and |
| Improvement in cycle stability of Si negative electrode by Cr doping and by coat |
| Effect of zirconium on the microstructure and electrical properties of Cr-Si-Al |
| Diffusion of chromium in nanocrystalline iron produced by means of surface mecha |
| Mechanism of hardening in Cr-Al-N-O thin films prepared by pulsed laser depositi |
| Microstructures of melt-spun Cu100-x-Crx (x=3.4-25) ribbons |
| Surface nanomagnetism on Fe and Cr(001) films |
| Selective fluorescence determination of chromium(VI) with poly-4-vinylaninline n |
| Strong photoluminescence from Cr3+ doped porous anodic alumina |
| Mechanical properties of NiAl-Cr alloys in relation to microstructure and atomic |
| Phases interface in deformation processed Cu-15 wt.%Cr composite prepared by ele |
| The influence of zirconium on the crystallization behavior and electrical proper |
| Synthesis and characterize of trivalent chromium Cr(OH)3 and Cr2O3 microspheres |
| Development and oxidation at 800°C of a novel electrodeposited Ni-Cr nanocom |
| TEM study of the structural dependence of the epitaxial passive oxide films on c |
| Wettability and crystalline orientation of Cu nanoislands on SiO2 with a Cr unde |
| Nanostructure of protective rust layer on weathering steel examined using synchr |
| Mechanical and microstructural investigations of nitrided Fe-Cr layers |
| Growth, magic behavior, and electronic and vibrational properties of Cr-doped Si |
| Effect of microstructure on the high temperature tensile properties of Fe-17% Cr |
| Formation of Cr-germanide nanoparticles during growth of epitaxial Ge-Cr thin fi |
| Photomask Cr-MoSi etching |
| Freestanding SiGe/Si/Cr and SiGe/Si/SixNy/Cr microtubes |
| Feasibility of diamond-like carbon coatings for orthopaedic applications |
| Carbon induced metal dusting of iron-nickel-chromium alloy surfaces: a scanning |
| Sintering Al2O3-Cr composites made from micro- and nanopowders |
| SIMS depth profile analysis of nanostructures |
| Preparation and application of a novel core/shell organic nanoparticle as a fluo |
| Aligned carbon nanotubes by catalytic decomposition of C2H2 over Ni-Cr alloy |
| Preparation of fluorescent polyvinyl alcohol keto-derivatives nanoparticles and |
| Structure and magnetic properties of Cr nanoparticles and Cr2O3 nanoparticles |
| Orthogonal design of technology for electrodeposition nanocrystalline Fe-Ni-Cr a |
| Structure and magnetic properties of Co-Cr solid-solution nanocapsules prepared |
| Penetration of electromagnetic fields through multilayered and cluster-layered F |
| Influence of the bias voltage on the structure and the tribological performance |
| Spin structure of Cr with insertion of non-magnetic monatomic layers |
| Spin ordering in chromium layered structures with inserted nonmagnetic monolayer |
| Study of alloying mechanisms of ball milled Fe-Cr and Fe-Cr-Co powders |
| Chromium-doped titanium oxide thin films |
| A study of the mechanical properties of TiN coating of Cr-Ni alloy |
| Structure-property relations in Cr-C/a-C:H coatings deposited by reactive magnet |
| Adsorption-induced polymer translocation through a nanopore: a Monte Carlo inves |
| Effects of Si addition on the characteristic evolution and syntheses of nanocomp |
| In situ nanointerconnection for nanoelectronics via direct auto-catalytic latera |
| Morphological alteration upon phase transition and effects of oxygen impurities |
| Stable laser-diode pumped microchip sub-nanosecond Cr,Yb:YAG self-Q-switched las |
| PVD synthesis and high-throughput property characterization of Ni-Fe-Cr alloy li |
| The temporal evolution of the nanostructures of model Ni-Al-Cr and Ni-Al-Cr-Re s |
| Cr-diamondlike carbon nanocomposite films: Synthesis, characterization and prope |
| Enhancement of exchange bias in thin PtMn antiferromagnets by Ru and Cr nano-lam |
| Ferromagnetic GaN-Cr nanowires |
| A REFLEXAFS STUDY OF THE LOCAL STRUCTURAL-CHANGES AROUND IMPLANTED YTTRIUM IONS |
| DEPTH PROFILING BY MEANS OF THE COMBINATION OF GLANCING INCIDENCE X-RAY-FLUORESC |
| Synthesis of nanostructured Ni/Cr and Ni-Cr3C2. Powders by an organic solution r |
| The influence of the argon pressure and substrate temperature on the structure o |
| Nanoscale segregation or precipitation in Fe-Cr alloys |